Jump to content

luk4mu5

Members
 View Profile  See their activity

  • Content Count

    46

  • Joined

  • Last visited

Posts posted by luk4mu5

  3. Posted

    Like the title says I'm looking for sun roof rails and motor. I managed to snap the front little plastic arms when it jammed, ideally replace the lot or I'll take a bit here and a bit there to rebuild the set.

     

    Also the full mechanics and motors for the doors. As I'm wanting to upgrade the early manual winders to electric.

     

    Would also be interested in the switches and the speaker/door pocket plastic trim to house them in if available.

     

    Cheers.

     

     

     

    Sent from my iPhone using Tapatalk

  11. Posted · Edited by luk4mu5

    About 6/7years ago I got my first one a 2.0 8v I think. Mint condition for £700. Then I got a rusty VR6 that needed some tlc for £1200 2-3 years later.

    Then I got my current one in March for £1300. Needing lots of Odds and sods doing to it but still road worthy. ( although right this second I'm in a recovery truck because the gear linkage snapped )

     

    Looking at sold listing similar to my first Rado, I will be looking to part with £3-4000 for the same condition. (At least as I remember it)

     

    10 years I reckon we'll be easily looking at £8-10k or more. And probably 2k for a bottom end 'project car'.

     

    If I had the cash I'd buy up all I can and sit on them for a few years.

     

     

    Sent from my iPhone using Tapatalk

  14. Posted

    Cheers guys!

     

    I think I may just have to opt for both the floor ring and that one you got there dragon.

     

    While I was thinking about how to solve this issue I started thinking about the 2 cup holders that most modern cars have located next to the hand break.

     

    I'm wondering if you guys have ever seen anyone that has been able to shift the handbrake over to allow for such a thing?

  15. Posted

    Between legs! Been there done that. Had the burns, defiantly not going back there again.

     

    Mk4 cup holder looks like a good idea. But guessing that's at the loss of either the radio or the heater controls.

     

    Wouldn't like to screw any of those flimsy flippy cup holders you can pick up at the services or Halfrds.

  18. Posted

    There's this battery like thing I only noticed because it was disconnected. 3ad2d56d5ad4802665a11a14198cbeac.jpg

    It's located just In front of the battery under the end of the slam panel.

     

    Just can't figure out what it is, why it's there and why it's been disconnected.

     

    Can you shed any light?

  20. Posted

    Nice that's good to know, What about switch placement?

    I think I remember in my 95' one the switches were on top of the speaker mold, I could cut out a hole for them but I will still be left with the old winder hole. Know of any caps or plugs that would fit that nicely?

  21. Posted

    Got a 90' corrado with windup windows, drivers side is busted and I'm wondering if as I have to fix it can I squeeze a motor and switches in to the doors? will I have to switch out the rails? door cards need replacing to do it?

     

    any one dose this, advise and recommendations please?

  25. Posted

    1st (today 6:45ish) was just after i came off the M3 at the Fleet/Farnborough junction coming in to Farnborough (outside Nokia offices), i swan round the roundabout to see if i can catch what model you were in but taxi got in the way.Green one, Reg E298 *** i think. im sure you must have seen me too also in my Green C :p

     

    2nd (today 6:50ish)one was a Bergandy one comming off the Queens roundabout heading in to Farnborough on the Farnborough Rd/A325, possibly could have been purple.

×
×
  • Create New...