k4na.x

thanks for your responses.

I have added in wire colours and pin numbers in my first post.

I have identified the wiper motor plug and reverse sensor.

I think 4 is the exciter wire also now - thanks fla

Can anybody help?

Or has any close up pics of wiring/engine bay?

Any help is appreciated.

Thanks!!

Hi all,

As per the title I am after some help with identifying the below plugs on the engine bay wiring loom please. Loom is from a golf mk3 vr6.

1.

Location next to ECU plug - outside temp sensor?

2 pin - green with white stripe and green with brown stripe

2.

Located next to water reservoir

2 pin - green with white stripe and brown with green stripe

3.

Located just before radiator & fan plugs

2 pin - green with brown stripe and brown with blue stripe

4.

Located next to starter motor plug

1 pin - all blue

5.

Located next to starter motor plug

2 pin - green with black stripe and brown with green stripe

6 & 7.

Located at the end of drivers side loom near to horn plug - is larger one AC related?

2 pin - white with red stripe and brown with white stripe

4 pin - green with red stripe, black with yellow stripe, green with blue stripe and blue with white stripe

In addition could anyone advise wire colours/provide picture of aux water pump if none of the above.

Your help is appreciated and please let me know if you need any further info on any of the plugs

Thanks in advance!!

to mount vr6 02A gearbox onto r32 engine you use the vr6 clutch and flywheel.

I have the VR clutch and flywheel.

I just wanted to know if the VR input shaft on the gearbox when fitted to the r32 engine will fit exactly the same as the input shaft on the r32 gearbox.

After a bit of help in regards to the input shaft on the VR box and that on the R32 box.

Is it exactly the same length and fitment i.e. the input shaft on the VR box will fit straight into the r32 block when mounting?

Thanks!!!

R32 | Silver | Leicestershire

Price: £4,699

Description:

FOR SALE: 1994 M-reg Corrado R32

Hi all,

The story:

Unfortunately It is time that I sold my Corrado. This was previously listed as a feeler but I couldn't face selling hence I removed it from sale however my circumstances have now changed and I would rather it goes to a good home.

The car started life as a VR6 and was converted to an R32 in 2009 using a Golf MK5 BUB engine which currently has around 17k on it.

After previously listing this I found that the history behind the engine/wiring set up was that it was put together by Pete Griffith who is a known user of this forum. The previous owner purchased the engine etc from Pete and fitted this all into the rado.

I bought the rado in back in Oct 2010 after the conversion was done.

I drove the car for a few months and then unfortunately I had to move house and so all funds were put into the house. This has meant that the rado has been SORN since around January 2011 due to the lack of funds with the intention of getting it back on the road. This however has not been possible and so the rado has been stored in a garage since but regularly started, warmed up, driven and cooled down etc to keep it running as it should.

The car therefore currently has no MOT (expired August 11) however I don't see this being a problem as it is mechanically sound and flew through previously

I have a big folder full of receipts and bits going back a number of years.

The spec:

Body has just over 122k on it and is in very good condition, no rust at all. There is a slight bit of damage on the drivers door (can be seen on the side view picture)

Underbody wax sprayed to protect

Golf MK5 BUB R32 engine with around 17k on it

Remap by SWICT

VR6 5 speed gearbox with a quaiffe diff and helix clutch

Battery in the boot relocation

koni coilovers

Bonrath reinforced top mounts

Golf MK5 R32 accelerator pedal

Running on MK5 R32 standard ecu with wiring conversion by SWICT

Cat back Milltek exhaust

BMC CDA air filter

B&M quickshift

Mocal oil cooler

Custom fan set up

Other Bits:

Many new genuine bits fitted in 2009 and hardly any mileage since.

Mileage on the MOT in August 2010 was 120k so hardly any miles covered over the last 2 years.

Spoiler still works

ABS works

Handles and drives perfectly

The bad bits:

Sunroof does sometimes stick on closure

Knock to the door as mentioned above

Temp guage and rev needle need wiring up (I have the canbus converter however which will solve this but just don't have the time)

Electric mirrors not very electric currently

Does need 2 new tyres hence the highline wheel currently used however I have the other speedline also

This really is a nice car and a credit to its previous owners. It shouldn't be sitting in my garage any longer!!!

To add i'm sure you all will know but the sound of this with the milltek is amazing. I smile everytime I switch it on :)

I'm sure I've probably missed a lot so feel free to ask!

Thanks for looking and reading.

Do you have full lock set including ignition barrel, glove box lock and keys?

If so how much?

Cheers

I'll take one. pm sent!

R32 | Silver | Leicestershire

Price: £4999

Description:

Hi all,

This is currently a feeler to see what interest there is out there as I just don't get to use it and so would prefer it to go to a good home.

Saying that I am in no rush so will not let it go for silly money.

The car started life as a vr6 and then was converted to an r32 in 2009 using a mk5 lump which currently has around 17k on it.

I bought it in back in Oct 2010 after the conversion was done.

This is a real sleeper as it looks bog standard but it is a real beast and I have loved driving it.

Unfortunately it has been on sorn since around Jan 11 as I moved house and didn't have the funds to insure this and my daily however it has been stored in a garage for the whole time and regularly warmed up etc to keep it running as it should.

The car therefore has no mot (ran out aug 11) however I don't really see there being a problem in getting one.

I have a big folder full of receipts and bits going back a number of years.

So the spec:

body has just over 122k on it and is in very good condition, no rust at all. bit of damage on the drivers door (pic included)

underbody wax sprayed to protect

mk5 r32 lump with 17k on it

remap by the vag doctor

vr6 gearbox with quaiffe dif

battery in the boot

koni coilies

bonrath reinforced top mounts

mk5 r32 accelerator pedal

mk5 r32 standard ecu

milltek exhaust

bmc cda

spoiler still works

B&M quickshift

mocal oil cooler

many new genuine bits fitted in 2009 and hardly any mileage since. mileage on mot in aug 2010 was 120k so hardly any miles covered over the last 2 years.

Does have a couple of bad bits but nothing major at all:

sunroof does sometimes stick on closing which is common on these cars

headlight switch can be tempremental

knock to the door

temp guage and rev needle don't work. I have the canbus converter however which will solve this.

electric mirrors not very electric lol

needs 2 new tyres hence the highline wheel currently used however I have the other speedline also

This really is a nice car and a credit to its previous owners. It shouldn't be sitting in my garage any longer!!!

To add i'm sure you all will know but the sound of this with milltek is amazing. I smile everytime I switch it on :)

All it needs is a set of wheels and dropping a bit more and thats it.

I'm sure I've probably missed a lot so feel free to ask!

I am open to offers.

Thanks for looking and reading.

blue corrado heading towards enderby leics today at about 4

think spotted the same blue corrado in enderby parked up K reg, dropped, VR6

red rado on narb road in Leicester today at about 1pm.

caught a last min glimpse

spotted a black rado around rowley fields area in leicester

plate was something like K*** HJA

spotted a red corrado today at about 6.30ish on Narborough Rd Sth in Leicester.

sounded and looked nice, think plate was something like G* DKO, could be completely wrong though lol.

was just about to post this as well.

got to fill all the cars up tomorrow lol.

ok well i woke up to what looked like a flat-ish tyre so replaced it and the noise has gone.

checked the wheel and all other surfaces and no rubbing marks so not sure what is was really as tyre wasn't close to being completely flat at all.

strangeee

will have to get it jacked up in the morning quickly before i go work.

hope nothing major. don't sound too good though

spotted a yellow corrado with clear white rear lights and some sort of rear valance near fosse park today in leicester

nice guide there.

magnecor have always been good when i have used them

tyre seemed fine but will see if it's flat in the morning.

I hope not.

hello...

as in the title as of today my car has started whining from the passengers front wheel area.

It whines all the time as i drive with a sound of rubbing at the same time should i say. (it's a bit hard to describe).

Bit dark now so cannot check but any ideas?

i'm thinking bearing, brakes rubbing at one spot, maybe driveshaft?

any help is appreciated.

cheerssss

that looks a bit slikkkk.

not too sure, I think the audi drl formation is hard to beat although if done properly can look good on some cars

Just read through the guide and it's pretty much everything I could think of, only ques i had was that i was told that you could use a mk4 r32 fuel line and fpr instead of the mk5 rail and in line pump? not sure if this is correct though.

great guide!!

spotted a black/dark blue rado with red badges from a distance in leicester today.

Just flicked through most of this and am really impressed.

niceeee lol.