16vTdub

Inbox me a contact number please

sorry 2 bump this up.. Im also wanting to do this on my early corrado if anyone can help out?

Still for sale?

Still available? Any chance of some pics please

Cheers for the link mate, But will my G60 flywheel not work?

The gearbox bracket I will be using the dutchbuilds one..

The driveshafts are standard items, Can I not swap the driveshaft cups over from the 02J so I can run my current driveshafts?

Would the diesel gearbox work is my main question :scratch:

I am thinking about going down the 6speed gearbox route with my 20vT corrado..

I was wondering if anyone can shed some light into a 6speed conversion on a 1.8t 20v AUM engine.. I have sourced a 6speed setup out of a bora pd 130 the gearbox code is erf or efr the seller is unsure on the actual code.

Apparently he has everything needed to change from 5speed to 6speed, Gearbox, drive shafts, hydro line(clutch line) with clips and gear selector with knob

Now my question is will this gearbox setup work with my engine which is currently running a 02J with a single mass G60 flywheel and vr6 clutch.. Also what flywheel and clutch setup will I need to use if I will be using the 6speed gearbox?

Is this still available??

Are the alloys all straight with no buckles etc...

Also would you be willing to send to london?

Where are you located mate?

Interested in this pm details

Pm'd

Long shot but is this still available?

Any chance of some pics of the black plastics mate?

Hi mate can do it for £30 posted.

 

Cheers Adam

Is that for both sides loom and relay box? Any chance of some pics

As title states im looking for a complete electric window wiring loom setup out of a early corrado. I have the switches so only need both driver/passenger side looms and relay box I think?? :scratch:

Close as possible to london so I could collect otherwise I dont mind paying for postage if the price is right :thumbleft:

I was wondering if anyone can help me out?

Im replacing my dashboard atm and have notice my car runs the mk2 electric window loom and switches which are located in the centre pod, Now I really want to use the original switches on the door cards so was wondering what will have to be done?

Any info or help is appreciated

I have a rear bench out of a corrado, It comes with the centre arm rest as shown in the pics

The bench is in good condition with minimal wear markings and is perfect if you would like to fit corrado seats into a mk2 or for someone needing it for replacement.

Here are some pics:

Can do with a good clean as it has been stored in the garage for a while now.

Price - £40

Location - North West London

Contact number - Pm me

I have a complete set of early spec door cards removed from my corrado due to leathers been put in, The door cards are in good condition with minimal wear markings.

Here are some pics:

They can do with a good clean as they have been stored in the garage for a while now.

Price - £40

Location - North West London

Contact number - Pm me

Here I have a front right hand side black A pillar out of my 20v which has a dual gauge pod fitted to it. Only selling due to taking a different route with the interior..

The pod takes 52mm gauges

This will be a straight fit to any corrado and does look pretty good mounted up insight of the driver..

Price: £40

Location: North West London

Contact: Pm me

Homemade subframes that do need to be bolted to the floor at the front and slide into the runners at the back. Not as horrific as it sounds! The seats do still slide forwards and back.

 

Any chance of some pics of how they are mounted in the car?

Are the TT seats on corrado subframes or have they been bolted to the floorpan?

Price on both front tow eye covers posted to london :thumbleft:

No worries buddy, Drop me a pm with the pics

If you can please mate, I want to see how they look on the car.. :thumbleft:

Inbox me your postcode and il see if I can get a lift up to collect it mate :thumbleft:

Very interested in the smoked rear lights..

Have you got any pics of these fitted on your car?