potatonet 0 Posted August 2, 2005 IF the little rubber pieces arent in the exact same place that they were before the MFA will not work, therefore that is your problem, mess around with them and try it out, it will fix the problem, I had the same issue. Quote Share this post Link to post Share on other sites
flusted 0 Posted August 3, 2005 wicked! i dont have pink bits? my foam thingys are white? am i missing something pink? Quote Share this post Link to post Share on other sites
potatonet 0 Posted August 3, 2005 dont worry about the pink, they didnt come on all corrado's. you should have 2 Rubber or foam bits that contact the top and bottom of the LCD display, make sure that the minor indentations line up with the marks on the LCD display. just mess with them till it fixes, you can tell which one goes on top by getting the top bar working and the top half of the LCD working as well. also mark which side is top and bottom for each piece its much easier than guessing later. Quote Share this post Link to post Share on other sites
sciroccotune 0 Posted August 3, 2005 what he said ^^^^ :-) Quote Share this post Link to post Share on other sites
Madjackal 0 Posted August 3, 2005 Sorry to be off topic but who did ya rear number plate recess? its lookin pretty slick! Quote Share this post Link to post Share on other sites
flusted 0 Posted August 3, 2005 did it myself using a sh1tsibishi colt reccess Quote Share this post Link to post Share on other sites
