antonio_b12 0 Posted July 28, 2005 basically will be doing the bottom end soon, does anyone know where i can get the high temperature paint/spray, is there specific one's or will i find 1 at my local halfords? cheerz Quote Share this post Link to post Share on other sites
Rpmayne 0 Posted July 29, 2005 Think you can just use hammerite and paint it on. Mines been done with that and its lasted pretty well. Quote Share this post Link to post Share on other sites
Neil VR6 0 Posted July 29, 2005 I got some high temp spray from Halfords for my rocker cover in a kind of moon grey type colour and is been fine for months now. I put about 8 thin coats on waiting a few mins between each coat. It came up a treat. Might want something a bit hardier on a block though an it's likely to get oily and stone chipped Quote Share this post Link to post Share on other sites
MillSpeed 0 Posted July 29, 2005 I used hammerite aswell, no problems brush painting onto cast, comes up lovely. Those aerosol paints are far too thin for my liking. Quote Share this post Link to post Share on other sites
antonio_b12 0 Posted July 29, 2005 yea my other mate was mentioning that. thanx hammerite it is! Quote Share this post Link to post Share on other sites
Scruffythefirst 0 Posted July 29, 2005 Choose a light colour so you can see oil leaks etc Quote Share this post Link to post Share on other sites
antonio_b12 0 Posted July 29, 2005 yea went to halfords today, saw the hammerite (light blue) gona get two cans of them, when its time to paint. cheers Quote Share this post Link to post Share on other sites
