saysomestuff 0 Posted January 4, 2006 Lets say I wanted to fit MKIV brakes. Could I use a G60 gearbox and driveshafts with MKIV (5 stud) hubs on the front? Any issues on the back? Cheers, Cole Quote Share this post Link to post Share on other sites
saysomestuff 0 Posted January 4, 2006 The only reason I ask is because it's alot of farting about getting hold f the bits and then trying them, finding they don't fit and trying to get rid of them! Has anyone tried getting MKIV hubs married up to ANY C gearbox? Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted January 4, 2006 mk4 hubs are nothing like corrado ones. but if you have vr6 huns, then 288 or 312mm mk4 brakes will fit. Quote Share this post Link to post Share on other sites
saysomestuff 0 Posted January 5, 2006 thanks Phat, I was hoping someone like you would answer. You will also know by what method the (MKIV) ESP/ABS speed sensors are attached to the hubs. Easy enough to fab onto G60/VR carriers? I think you can guess where I'm going here... Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted January 5, 2006 they are just ABS sensors. Use the corrado ones. Quote Share this post Link to post Share on other sites
saysomestuff 0 Posted January 5, 2006 I was hoping as much, so i could just hook the standard C ABS sensors up to MKIV ABS if I wanted (or fit the MKIV ones into the C hub) Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted January 5, 2006 You can fit MK4 sensors into the Corrado hubs. I have. Jay Quote Share this post Link to post Share on other sites
saysomestuff 0 Posted January 5, 2006 Sweet! Cheers guys Quote Share this post Link to post Share on other sites
