Shaggy 0 Posted January 23, 2006 Just changed my crankcase bearings on the g60, how long should i run them in for? Cheers Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted January 23, 2006 Crankcase bearings? The only bearings on the crank are mains and big ends, which have you replaced? So long as you used the relevant bedding paste (or liberal oiling with engine oil) then just take it easy for the first few hundred. Apologies in advance if I've misunderstood! Quote Share this post Link to post Share on other sites
samg60 0 Posted January 23, 2006 well if you mean big end shells, did mine year and half ago thrashed it straight away, probably not the best thing to do but cant help myself with a g, hard no to grow horns :evil: , anyway had not problems with them since, just lots of oil on the bearings before hand. Quote Share this post Link to post Share on other sites
potatonet 0 Posted January 24, 2006 500 miles dont rev past 5, first 100 dont rev past 4. grease em up good. =-) this is for rod bearings =-), crank bearings are 100 miles dont pass 5 and you are set. if you use enuff grease you can thrash them straight off. Quote Share this post Link to post Share on other sites
Shaggy 0 Posted January 24, 2006 yeah it was the rod bearings i was on about.... 8) I managed to get some oil onto them before i put them in, i havent taken it past 4k anyway as i am runnin the charger in at the mo, so looks like i will take it easy untill i hit 500 miles or so... Thanks guys! Cheers Quote Share this post Link to post Share on other sites
potatonet 0 Posted January 24, 2006 nice wheels Quote Share this post Link to post Share on other sites
