Merc rims

[AB 0]

Hi just a quick one, can you get adaptors for 4x100 to 5x112 (i think) for mercades alloys. thanks.

[OSV 0]

No, need 2 sets of slim adaptors,4x100-5x100-then-5x100-5x112 not recommended.

[AB 0]

ok cheers.will have to think of another rim. cheers.

[Furkz 0]

No, need 2 sets of slim adaptors,4x100-5x100-then-5x100-5x112 not recommended.

 

need to stress dont try this... thats crazy

 

i think the safest route if dong hub conversion to 5x100 and then using 5x100 spacers to 5x112

[Shaggy 0]

either that or get them custom made??

[OSV 0]

Can't be done in one spacer apparently due to the way they line up?

[Furkz 0]

2 holes overlap ? do they not>?

[Bally 0]

i think the safest route if dong hub conversion to 5x100 and then using 5x100 spacers to 5x112

 

furks is correct...

[billinjah 0]

if they overlap you can get your hubs redrilled retro dubs in cambridge do this.

[Furkz 0]

is that safe though!!!!!!!!!!!!

[PhatVR6 0]

can be done actually.

 

AAT do a 2 peice spacer/adapter to go from 4x100 to 5x112.

 

don't ask me to explain, took me a while to get my head around it, but it's obvious when you see how it's been done.

[Furkz 0]

PhatVR6, is that safe though???

[billinjah 0]

yeah redrilling is much safer than adapters anyway but normally it cant be done as 130 to 100 is the most common swap and a 100 hub isnt big enough. tbh if the adapters were steel then running two would be no problem at all its just not the done thing!

[yoda 0]

im converting mine next week i will post pics i have done this to my mk2 10 years ago you need mk3 hubs cv new bearings press them into your 4 stud housing redrill 280 g60 to five stud job done

on my mk2 its was major hassle as no one could or would help me tried all the big names they all said i had to change the sub and all

but i done it and it worked

ALWAYS USE NEW BEARINGS BACKS JUST SWAP THE DISCS FOR VR OR GTI3

ADAPTERS I CAN DO 5X100>5X130 PORSCHE5X100>5X112 MERC WITH CORRECT HUB SIZES ALL ADAPTERS FULLY HELICOILED AND HUBCENTRIC