Powerflex bushes (ARB)

[.Rich. 0]

At the beginning of the year i bought a full powerflex bush kit from Venom Motorsport. I started with the rear beam bushes as i heard they are a pain (true), but after hammering out the old bushes i soon realised Venom had sent me the wrong bushes as they were way to small. No problem though, i rang him and quoted all my product codes and he sent me the correct rears saying the rest will fit.

 

Ive now started to tackle the front end and although the 4wishbone bushes and ARB->chassis mounts fit perfectly i still have 6bushes left with nowhere obvious to put them.

 

PFF85-208 - Front Eye Bolt Mounting Bush (2 per side / 4 in pack)

#4 on image

 

PFF85-209 - Front Anti Roll Bar Eye Bolt Bush (1per side)

#5 on image

 

http://www.powerflex.co.uk/images/drawi ... k2diag.gif

 

From the image provided on powerflex they are situated in the ARB droplink?

 

Surely this isn't right, the eyebolt bush is much to big to fit and where would the two large mounting bushes go? Atm there is just one small bit of rubber?

 

The guy is adament these are the correct products despite powerflex site saying:

 

PFF85-209 - Not VR6

[Kevin Bacon 5]

Those parts are for the 16V/G60 anti roll bar. VR6 uses a completely different drop link as you know!

 

Send them back or sell them in the parts section :-)

[.Rich. 0]

Thanks kev ive had two conversations with the guy but he's not budging so im gunna have to sell them on myself im affraid.

 

Any idea on a price for either gsf/vag droplinks?

[.Rich. 0]

nm £13 each