Mancorr 0 Posted January 18, 2007 The offset of my wheels are 31ET (found out today when removed one of my wheels). Im sure Raddo's are meant to be 35ET? Is 31ET ok? Wheel sizes are 15's with 195/50 tyres on. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted January 18, 2007 Should be 33 on 4 cyls but 31 is fine Quote Share this post Link to post Share on other sites
daves16v 1 Posted January 18, 2007 While we're on the subject of offset, what are the opinions of ET20 on a valver? I've got ET35 wheels but may stick on 15mm spacers I had before I bought the wheels. I'm thinking accelerated wheel bearing wear. Stance would look go though. Wheels will be 7" with 205's. Quote Share this post Link to post Share on other sites
daves16v 1 Posted January 22, 2007 Anyone care to voice their opinion on the above? Quote Share this post Link to post Share on other sites
VeeDub Geezer 0 Posted January 23, 2007 as long as you use longer bolts then there is only the clearance issue (as well as high wheel bearing wear) Quote Share this post Link to post Share on other sites
daves16v 1 Posted January 23, 2007 ok thanks. Quote Share this post Link to post Share on other sites
