Mancorr 0 Posted January 30, 2007 Just bought some locking wheel nuts and they dont fit, yet the box says they are for Corrado's etc. The size of the locking nuts are M14 x 1.5....if this means anything to anyone! Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted January 30, 2007 Depends if you have a VR6 or 4 cylinder Corrado (would help to mention this in the post or a signature ;-) ) VR6 are the bolts you currently have (M14 x 1.5) and 16v/G60 are M12x1.5 Quote Share this post Link to post Share on other sites
Mancorr 0 Posted January 30, 2007 cheesewire, Sorry mate....its a 1.8 16v. Oh so i have VR6 ones....oops! Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted January 30, 2007 No worries, take em back and swap for M12s mate! Quote Share this post Link to post Share on other sites
Mr_Rossy 0 Posted February 1, 2007 I'm after some vr6 m14 x 1.5 locking nuts if you need to sell them. Cheers M Quote Share this post Link to post Share on other sites
vwdeviant 0 Posted February 2, 2007 OK am going :offtopic: again :D Any-one upgraded to Studs? Had to change a wheel a while back and thanks to some ham fist in the past the Screw that holds the front disc in place has sheered... So I'd like to get some studs in there for piece of mind and also ease of wheel change... Quote Share this post Link to post Share on other sites
