Jump to content
Sign in to follow this  
snattrass

Rado take Golf Power Steering pulley?

Recommended Posts

Hi,

 

What, if any, kinds of golf power steering pulleys will fit my 16v 1800 rado? Also, can I drive the car with the PS pulley removed so that I can compare the pulley at the scrappy's or does removing the PS pulley make the car undriveable? My PS pulley's buckled! I take it removing the pulley is just a case of undoing the 4 allen key bolts.

 

Thanks,

 

Simon.

Share this post


Link to post
Share on other sites

most mk2 golfs and a few mk3's use the same pump and pulley, it'll be 'f'-ing hard t odrive with no PAS

Share this post


Link to post
Share on other sites

it should be ok unless you have air con as well, on vehicles without aircon the v-belt drives the power steering pump only, but on vehicles with aircon the v-belt drives the power steering and the water pump.

Share this post


Link to post
Share on other sites

was a complete bastard to remove my pulley! Even several whacks with a rubber mallet didnt do the trick. Ended up having to take the whole pump off before the pulley gave. I had to drive without PAS whilst sourcing parts - didnt realise the C was sooo hard to turn without power steering :(!

 

but good luck mate! I'm sure you'll have no problems, i'm just pretty shi7 in general :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...