rado-steve 0 Posted April 4, 2008 Just a quickie....... Is a Corrado Rear beam same as a MK2 golf???? I know the bushes are the passive rear steer things just wondered about the beam as wanna get one to clean up/powder coat before I do my suspension etc! Thanks Steve Quote Share this post Link to post Share on other sites
Goldie 2 Posted April 4, 2008 The beam is the same, not sure whether it will have all the fitting mounting points though for the ABS wiring runs.. Quote Share this post Link to post Share on other sites
rado-steve 0 Posted April 4, 2008 I don't have ABS so that'll be OK :grin: Cheers Goldie! Quote Share this post Link to post Share on other sites
Goldie 2 Posted April 4, 2008 Looks like your laughing tea cakes then Steve, happy days... Quote Share this post Link to post Share on other sites
davidwort 0 Posted April 4, 2008 yeah, there's a whole load of part number alternatives and the only ones the same as the 16v/G60 Corrado are the G60 mk2 golf there is also a change from chassis no. 50 -L-035000 (round about 1991) would be good to know if it's only minor fittings (like the ABS) that are different as that would open up a whole load of options for much later parts (in better nick) mk3's possibly. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted April 4, 2008 The difference is the roll bar - the G60 one is huge compared to a 16v GTI Quote Share this post Link to post Share on other sites
davidwort 0 Posted April 4, 2008 so did the Corrado rear integral ARB change in diameter in 1991/2 then?, the 16v and G60 part no.s seem to be the same but updates after the 'L' chassis number. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted April 4, 2008 I'm not sure Dave, I think the bar is just the difference between a Golf and Corrado one... Quote Share this post Link to post Share on other sites
