Dub20vt 0 Posted May 31, 2008 does anyone know what pressure a G60 pump produces and what sort of flow rate they have?? i know stock they've only run a 3bar fpr (iirc) jus wondered what the actual pump produces and if it'll be gutsy enough for my 1.8T?? ... else it's back to an old K-jet pump for me. :lol: Quote Share this post Link to post Share on other sites
flusted 0 Posted June 2, 2008 depends if you have the twin pump set up? Quote Share this post Link to post Share on other sites
Dub20vt 0 Posted June 2, 2008 ooo ok. i'll have to have a proper look. is it obvious if i have the twin pump setup? i.e. both pumps mounted under the car?? :? Quote Share this post Link to post Share on other sites
dirtytorque 0 Posted June 2, 2008 what year is your car ? Quote Share this post Link to post Share on other sites
Dub20vt 0 Posted June 2, 2008 it's a '91 LHD G60. Quote Share this post Link to post Share on other sites
Silversea 0 Posted June 2, 2008 Just checked the pressure on my 93 G60 at the weekend and it was showing 3 Bar (45 Psi) with the vacuum pipe connected. Quote Share this post Link to post Share on other sites
flusted 0 Posted June 3, 2008 think pumps push well over 5 bar the fpr brings it down Quote Share this post Link to post Share on other sites
Dub20vt 0 Posted June 4, 2008 think pumps push well over 5 bar the fpr brings it down 5bar. :clap: that'll do nicely. think i best get a fuel pressure gauge on it just to check. i'd imagine it'll flow well enough for my measly TT motor. Quote Share this post Link to post Share on other sites
