Bally 0 Posted June 3, 2008 as above how do you remove/replace them?? Quote Share this post Link to post Share on other sites
yeti 0 Posted June 3, 2008 you mean the bit you hold to close the door with right?... gently lever the leather trimmed or plastic cover piece running down the front of the pull... then you can see a screw(s) - sorry cant remember if one or 2 - undo and pull away Quote Share this post Link to post Share on other sites
colinstubbs 0 Posted June 3, 2008 2 big screws! Quote Share this post Link to post Share on other sites
Bally 0 Posted June 3, 2008 sos lads I meant the handle you pull to open the door.. Ive bought some chrome ones so want to replace them... is it bedtime yet :lol: Quote Share this post Link to post Share on other sites
fla 9 Posted June 4, 2008 Need to take the door cards off. Then slide the complete door pull unit forward and it drops off teh door. Unhook the connecting rod and the door pul is now free in your hand. You then need to unclip the handle from its housing and replace with your new ones. Then refit. Might also be worth putting some padding behind the connecting rod as this sometimes starts to rattle. HTH. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 4, 2008 you should be able to slide the surround piece towards the rear off car with door card attached at it comes off, but you still need card off i reckon, just makes that a bit easier Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 4, 2008 pics i took of mine Quote Share this post Link to post Share on other sites
Bally 0 Posted June 5, 2008 wanted to see if I could get away with removing the handles without taking of the cards.. oh well no 5min job.. taken the cards of plenty of times... thanks guys... Quote Share this post Link to post Share on other sites
