OBD2 Conversion some help needed!

[L55KE B 0]

Hi everyone im quite new on this site and this is my first post, as im more of a reader than a poster anyway lets get bk to the point!

 

Im currently in the middle of an obd2 conversion on a mates 92 rado vr6, i am doin a complete engine and loom conversion for him and the donor car is a 96 obd2 passat vr6.

ive got both the obd1 and obd2 main looms out of the car and i think ive got most of these wires sorted except for a few, but the main problem where i may need a bit of help is the wiring for the transponder and the obd2 16pin diagnostic connector.

ive been researching on this for a while now and ive read the write up on vw vortex and corrado club of canada and they were both very helpfull ive also read a few bits on here but i cant seem to find much info on the transponder and diagnostic wiring side of things. i know you can get the transponder by-passsed but id like to fit it if its not that difficult and also it can save my mate some costs which he could spend else where.

I know from what ive read that a few people on this site have done this conversion so any help/info would be greatly appreciated

Thanks in advance Luke

[sim0n_parker 0]

ill second that mate, im sifting for info too,

could u pm me the links to the ones you have?

 

cheers mate

 

sorry for the hijack but free bump :)

[CorradoVR6-Turbo 0]

cant help you with the transponder as i had mine removed with the C2 software.

 

but these links might help.

 

http://www.a2resource.com/electrical/CE2.html

 

http://www.corrado-club.ca/forum/viewto ... sc&start=0

 

http://www.the-corrado.net/.archive/forum/viewto ... conversion

 

http://forums.vwvortex.com/zerothread?id=3914622

[L55KE B 0]

Thanks mate :thumbleft:

The first one should help and the others ive seen but again they are really helpful so looks like ill be getting stuck into this at the weekend but no doubt ill be bk asking more questions. thanks again luke