Rocket Ron 1 Posted April 27, 2009 I'm about to renew my wishbones both sides and all associated ball joints on my 1994 VR6. I've noticed though that the sump is in the way of one of the securing bolts. Has anyone changed these before and can give me some guidlines etc. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted April 27, 2009 when i did mine i removed the sump, people will say there's another way, but i wanted to renew the sump gasket anyway Quote Share this post Link to post Share on other sites
G60SC_Stoney 0 Posted April 27, 2009 either remove the sump as above or undo the engine mounts and jack the engine up... Quote Share this post Link to post Share on other sites
