Help from g60 owner! TPS wires

[andycowuk 0]

hi all!

I stupidly forgot to disconnect the throttle pos ssensor when i was taking the engine out, and strangely enough the wires didn't impede the engine hoist! :epicfail:

I've got new ends to put into the plug, but i need to know the order to put them in. Can someone please advise?

TIA

Andrew

[andycowuk 0]

Anyone with either a g60 they can check the order of the wires in the plug behind the throttle body, or someone with the Bentley manual able to help out here? Its the last thing I need to do under the bonnet before its back on the road again!

 

TIA

 

Andrew

[waynos 0]

got my old g60 loom in front of me,if you look at the connecter with the pins facing you there is a red (blue trace) on the left,brown (white trace) in the middle, and blue (black trace on the right)

 

hope that helps dude

[andycowuk 0]

Thanks mate thats brilliant - although if i hold it upside down from you i'll get the left and right mixed up

 

If you peel back the rubber cover the pins are numbered - either that or just tell me if the notches on the inside were up or down.

 

Really appreciate your help :cheers:

 

A

 

 

edit to make this useful for future:

Key words:

G60 wire loom harness tps throttle position sensor pot connector plug

 

 

just had a look now mate

 

pin 1 - red (blue trace)

 

pin2 - brown (white trace)

 

pin 3 - blue (black trace)