alby328 0 Posted March 24, 2010 hi guys, hopefully someone can diagnose this problem... i just went to view a 93 vr6 which wasn't to shabby, so went on a test drive but as soon as i touched the brake pedal they didn't release.a bit worried i rang the owner and he couldn't help. whilst wandering what to do i turned the ignition off and the brakes released! but same problem occurred when i set off again so reluctantly i returned it back to the owner. when viewing the car i noticed the abs light was constantly on, owner told me he had new brakes fitted three weeks ago and the lights been on since. i hoped it was just sensor but obviously its something more. does this sound like a major/expensive problem? thanks alan alby328 Quote Share this post Link to post Share on other sites
borders16v 0 Posted March 24, 2010 Hope u get the answer. Same happened to me,new front discs/pads fitted then abs came on,then drivers caliper seized on,2 days later passenger seized on. New calipers fitted abs still on? Sensors done 2 years ago,were ok before new brakes. :cuckoo: Quote Share this post Link to post Share on other sites
alby328 0 Posted March 24, 2010 but did your calipers release when you turned the ignition off? Quote Share this post Link to post Share on other sites
borders16v 0 Posted March 24, 2010 NO on one side, slowly on the other, may well be a different problem i had/have. Bad brake fluid? Quote Share this post Link to post Share on other sites
