Difference with VR6 and non VR6 Brake Pressure Regulators

[quicky1980 0]

They seem to be different in part numbers, why is this? Is it and external or internal difference?

[Mawrick 0]

They seem to be different in part numbers, why is this? Is it and external or internal difference?

 

The brake pressure regulator's I guess is different.

 

Among a few other things - the tension spring on the VR6 is much shorter then the one on the G60.

 

:)

[quicky1980 0]

They seem to be different in part numbers, why is this? Is it and external or internal difference?

 

The brake pressure regulator's I guess is different.

 

Among a few other things - the tension spring on the VR6 is much shorter then the one on the G60.

 

:)

 

is the tension spring under a different part number?

I need to know if i should use a vr6 regulator when fitting the vr6 rear subframe to a 16v chassis

[Mawrick 0]

I would presume that you should use the VR6 one - as I think they are also fitted a bit different.

 

f.ex the spring goes directly to a "bracket" that's on the beam itselfe - I think the other ones will have a loose bracket that the spring attatches to.

(The calve itselfe is also atatched with bolts going from inside out - where the others I think is fitted with bolts going from outside and in - The VR6 uses M8X60 bolts, and the others use M8x14).

 

 

My brake valve (VR6 version):

 

 

[quicky1980 0]

cool, cheers