jackvine 0 Posted July 23, 2010 Hi All The oil temp on the mfa is not working all i get is the dashes which you normally get when the car is warming up, checked the wiring is still connected to the sensor and seems to be ok, is it likely to be the sensor or the mfa unit ? Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted July 23, 2010 Either the sensor is duff or the wiring has a break in it Quote Share this post Link to post Share on other sites
Dude VR6 0 Posted July 23, 2010 Were is the sensor located, mine has gone to :( Quote Share this post Link to post Share on other sites
Donjon 0 Posted July 23, 2010 Try unpluging the battery and leave it for 10mins, mine did the same and this sorted it! Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted July 23, 2010 Were is the sensor located, mine has gone to :( top of the oil filter housing Quote Share this post Link to post Share on other sites
daves16v 1 Posted November 23, 2010 I've just started experiencing a similar thing but it's intermittant. It started acting up some weeks back and has now completely stopped working, it's had a new sender about 3 months ago before it started playing up and all was well. I've put the old sender back in without success and now I'm back using the new sender. Weirdly it does sometimes work but doesn't give an accurate reading and that's using both old and new senders. Oh and I've cleaned the connector to the sender. I haven't disconnected the battery as previously suggested so I might give that a go. Looks like it maybe dodgy wiring or a duff MFA? Any thoughts? Quote Share this post Link to post Share on other sites
