jedi-knight83 0 Posted February 8, 2004 I have a VR6 and have been messing around with vag com and looking at the intake air temps. i would like to know where people put their cold air feed pipe (pics would be best) and if they have noticed any differences in driving? if they have run vag com themselves and checked intake temp after the cold air feed is installed? i am running a standard air box with a K&N panel filter thanks Quote Share this post Link to post Share on other sites
jedi-knight83 0 Posted February 8, 2004 just been out with vag com hooked up. air intake temp started at 9 degrees from cold and got up to 30 degrees when the engine warmed up to 100 degrees. Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted February 9, 2004 unless you travel at 5mph everywhere then the intake temps wont worry you at all..think about when your at about 90mph then the air is going to be cold Quote Share this post Link to post Share on other sites
jedi-knight83 0 Posted February 9, 2004 i just wondered if it would help. loads of people put one in when they install a cone filter... Quote Share this post Link to post Share on other sites