Changing spark plugs in a 16v

[Cragel 0]

I don't know if I'm being a little thick here but I can't get the socket down the cylinder to remove the spark plug. The socket looks the same size as the ht lead nut will only go in a tiny bit, I don't want to force it then get it stuck. What am I doing wrong? It's a kr engine by the way.

 

Thanks pepz.

[pummer67 0]

are you using a spark plug socket? A spark plug socket is deeper. If you are they normally come with some sort of rubber on when they are brand new and are a little stiff.

[Yandards 0]

There are 2 types of spark plug socket, you want the smaller diameter one.

 

If you go to Halfords etc you can see the 2 different types.

[Cragel 0]

Yeah I'm using a 10mm socket. The smallest one.

[Toad 0]

Use a 3/8" drive socket, not the 1/2", otherwise they can foul on the rocker cover gasket part way down the hole.

 

Last thing you want is to get the socket stuck in the hole.

[Cragel 0]

Ah ha! That's what's the problem then. I'll have to wait till Monday then and swap it at work.

 

Thanks very much.