Jump to content
ger040

Corrado g60 not running correctly

Recommended Posts

Hello i have posted before about my car just out of storage and is not running correctly (corrado g60) - exhaust if continually steamy - smells of fuel and the fuel consumption is excessive - today while moving it the idle went to about 1500 and stayed there and there was a hesitation as if the car was about to backfire when the accelerator was pushed!

 

supercharged gave helpful advice and much appreciated

 

one item that he recommended that i check was to see if 12v was available across the fuel rail - i have checked this with max reading 0.7? i hope iam doing this correctly as the connectors at the fuel rail are well sealed (brown and white plugs - i did also disconnect them tested them at the terminals and again there was no reading. all this was done with the ignition live but no engine running.

 

if there is no reading is this an ecu fault - do i need to find a replacement or where else can the problem lie?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...