Grant Motorsport VR6 Corrado Breaking - Blackberry with Black Interior

[87 Jetta 16v 0]

Just a quick update. The list at the top has been edited. Also, the car will be going to the crusher in a week or so, so if you need any body panels, shout now...

 

Thanks,

 

N.

[veedub16v 0]

hi, would it be possible for me to cut the exhaust tunnel out of the car?

 

cheers

[krishen 2]

Hi, Did the heaters control sell in the end? If not was the fan setting working on all 4 settings? And how much?

 

Also do you have the plastic strip that goes across the top of the door on the inside. It sits on top of the door card against the window (hopefully you know what im on about lol). Need a drivers side one please.

 

Cheers

Krishen

[toledo 0]

Do u still have the eibach springs ?

Did you fit them hence you know they've done 5K ?

Which model range are they please ? how low do they go ?

how much posted please ?

Cheers

Matt

[87 Jetta 16v 0]

hi, would it be possible for me to cut the exhaust tunnel out of the car?

 

cheers

 

Hi there,

 

You could have the tunnel before the car is scrapped, yes. The only issue being that I have no power near or anywhere near the car or the garage so you would need either a generator or rechargeable grinder (if such thing exists) or a petrol version.

 

---------- Post added at 04:16 PM ---------- Previous post was at 04:07 PM ----------

 

Hi, Did the heaters control sell in the end? If not was the fan setting working on all 4 settings? And how much?

 

Also do you have the plastic strip that goes across the top of the door on the inside. It sits on top of the door card against the window (hopefully you know what im on about lol). Need a drivers side one please.

 

Cheers

Krishen

 

Hi Krishen,

 

Sorry, the fan controls were sold a fair while back. I do have the plastic strip that runs across the top of the door if that helps though.

 

Also, with regard to the fan settings, I would think that this is due to the resistor pack in the blower motor itself rather than the heater controls themselves. I have a fully working blower if that helps?

 

Thanks,

 

N.

 

---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------

 

Do u still have the eibach springs ?

Did you fit them hence you know they've done 5K ?

Which model range are they please ? how low do they go ?

how much posted please ?

Cheers

Matt

 

Hi Matt,

 

I didn't fit them but I had a receipt that dated them in 2010, and the mileage according to the MOT's of the car, and the odometer tied out to 5k miles.

 

They lowered the car about 40mm from standard which takes it from a 4 x 4 ride height to a nice useable lowered stance that will still clear a speedbump. I have them listed for £75. Postage would be £9 if that helps at all?

 

Thanks,

 

Neal.

[KADVR6 0]

Hi Neal.

 

do you still have the head off this car avaiable?? and if so you got any info on it and mileage etc etc

 

karl

[87 Jetta 16v 0]

Hi Karl,

 

I do still have the head and the original invoice from GMS for the full engine. I think from memory it has done circa 50k.

 

I hope that helps a little,

 

N.

[krishen 2]

 

Hi Krishen,

 

Sorry, the fan controls were sold a fair while back. I do have the plastic strip that runs across the top of the door if that helps though.

 

Also, with regard to the fan settings, I would think that this is due to the resistor pack in the blower motor itself rather than the heater controls themselves. I have a fully working blower if that helps?

 

Thanks,

 

 

Hi

 

Its the actual copper connections on mine that are buggered. Thanks anyway.

 

How much do you want for the plastic strip?

 

Cheers

Krishen

[87 Jetta 16v 0]

Hi

 

Its the actual copper connections on mine that are buggered. Thanks anyway.

 

How much do you want for the plastic strip?

 

Cheers

Krishen

 

HI there,

 

How does £5 posted sound?

 

Thanks,

 

N.

[krishen 2]

Sounds perfect. PM me payment details.

 

Cheers.

[87 Jetta 16v 0]

Done. It will be in the post tomorrow :-)

[dingo 0]

Hey

 

any chance you've got a driver's side front seat belt buckle in fair condition?

 

cheers

[87 Jetta 16v 0]

Hey

 

any chance you've got a driver's side front seat belt buckle in fair condition?

 

cheers

 

Just the buckle, as in the part on the strap? If yes, I do indeed...

[dingo 0]

when i say buckle I mean recipant part that you click the seat belt tongue into.. picture hopefully clears things up

if you've got one, how much would you want for it?

 

Thanks,

Dave

[87 Jetta 16v 0]

Oh, the clip. Sorry, I don't, unless you can use a rear one? :(

[dingo 0]

not sure i can use a rear one.. thanks anyway mate

[panderoo 0]

do you still have the ABS light... ?

 

and whats the part number ? PM me if you have please

[Kempy 0]

how much for just the knob neal. I seem to have loadsa gaiters atm lol

[ANDREW 30 0]

Regular 3 slat VW grill. Complete with VW badge. Good condition, all three tabs intact. £30

 

I'll take this if this is the posted price!!!

[87 Jetta 16v 0]

do you still have the ABS light... ?

 

and whats the part number ? PM me if you have please

 

From the wanted section I guess you are all sorted for this?

 

Thanks,

 

Neal.

 

---------- Post added at 10:20 PM ---------- Previous post was at 10:15 PM ----------

 

how much for just the knob neal. I seem to have loadsa gaiters atm lol

 

Hi there,

 

How does £14 posted sound?

 

Thanks,

 

N.

[ANDREW 30 0]

Regular 3 slat VW grill. Complete with VW badge. Good condition, all three tabs intact. £30

 

I'll take this if this is the posted price!!!

???

[krishen 2]

Hi Neal,

 

Sorry i posted on the ebay thread before you posted the items on this thread.

 

lll take the grill and drivers door handle if still available please.

 

Let me know payment details.

 

Thanks

 

Krishen

[yogi 0]

hi i will take the headlight switch plz ring me on 07773140140

[yogi 0]

hi i will take the light switch plz call me or text me 07773140140

[87 Jetta 16v 0]

Regular 3 slat VW grill. Complete with VW badge. Good condition, all three tabs intact. £30

 

I'll take this if this is the posted price!!!

 

Hi Andrew,

 

Sorry, this is the price collected. I can post at cost though.

 

Thanks,

 

N.

 

---------- Post added at 12:41 PM ---------- Previous post was at 12:39 PM ----------

 

Hi Neal,

 

Sorry i posted on the ebay thread before you posted the items on this thread.

 

lll take the grill and drivers door handle if still available please.

 

Let me know payment details.

 

Thanks

 

Krishen

 

Hi Krishen. Sold to you. I will drop you a PM with payment details.

 

Thanks,

 

Neal.