Any got a VR and a G60 lower balljoint handy?

[24V Renshaw 0]

I am after some direct comparison pictures between a G60 type and a VR6 type lower ball joint.

Inparticular any castor angle that they have.

If anyone one has both handy and could take some pics I will owe you a beer :)

 

Cheers

 

Jay

[bristolbaron 10]

if i was to guess anyone that may have both it would be yandards.. try pm..

[dr_mat 0]

The lower balljoint doesn't impart castor, the castor angle is defined by the position of the wishbone relative to the top of the suspension strut (i.e. the top mount).

Swap the balljoint and the castor doesn't change.

[Roger Blassberg 0]

Perhaps he means "Camber". Very slight camber change when swapping bottom balljoint, most adjustment is available on the hub carrier/strut bolted connection.

 

Best wishes

 

RB

[Erny 0]

Took a picture of a vr6 one at the scrapyard, The angle on there appeard to be about 45degree, had no tools to measure anything.