positive crankshaft ventilation valve needed

[ST0RMF0RCE 10]

Hey all - need this part for my vr6....

Thanks to some good information from forum members (thx) I have been advised what the part is and what the part number is :-

V7M0 128 101

My local garage reckons I have to buy the whole of the intake part for £££'s !!

I will enclose photos to help..

thx for looking, cash waiting..

Pete

[ATTACH=CONFIG]68743[/ATTACH][ATTACH=CONFIG]68744[/ATTACH][ATTACH=CONFIG]68745[/ATTACH][ATTACH=CONFIG]68746[/ATTACH]

[P3rks 11]

Check Here: http://the-corrado.net/showthread.php?68461-Clearout-Mainly-G60-VR6-Loads!-List-Updated-22nd-July

 

It's down at the bottom of the pictures/list

 

£40 posted.

 

I'll PM you too.

[CazzaVR 0]

You can buy it individually if you ask for the Sharan VR6 part, or alternatively Ford sell it on its own - £34 last year.

[P3rks 11]

You can buy it individually if you ask for the Sharan VR6 part, or alternatively Ford sell it on its own - £34 last year.

 

Approximately £50 now, and that was a few months back :shocked!:

[Stonejag 10]

Alternatively, you could just bin it. The 'T'-shaped hose runs to the rocker cover on one end, the PCV valve in the middle and the blue carbon canister valve on the other - I just ditched it and replaced with a new bit of hose. Make sure you do the clips up really tight or it'll gradually start leaking manifold vacuum and your idle will go really lumpy all of a sudden!

 

Easy and cheap...you don't really need it, just remove the inlet and give it a quick wipe internally every six months or so :)

 

Stone

[Stonejag 10]

Just as a quick update, here's how mine looks at the moment. Ignore the dangling connector, I haven't got around to cutting it off and repairing the loom yet!

 

[ATTACH=CONFIG]68828[/ATTACH]

 

[ATTACH=CONFIG]68829[/ATTACH]

 

[ATTACH=CONFIG]68830[/ATTACH]

 

Shout if it's unclear.

 

Stone