too hot 0 Posted August 13, 2012 Wanted a late rotary heater control panel. MUST WORK PROPERLY !!!!!!!! I have a garage full of control panels that supposedly were in perfect working order!!! Anyone got one????? Quote Share this post Link to post Share on other sites
BILLCOR 1 Posted August 13, 2012 Sell them all as spares and buy a new one :shrug: Quote Share this post Link to post Share on other sites
Tigerfish 10 Posted August 13, 2012 Depending what's up with the ones you have, I may be interested in a couple to canibalise for bits. Quote Share this post Link to post Share on other sites
tomi 10 Posted August 13, 2012 Sell them all as spares and buy a new one :shrug: go to the scrapyard and by one from golf III, seat Ibiza, , toledo passat b4 , but look 4 the option with 4 cabels not 3 ones as its 2 diferent models of them , and U need the one with 4 Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 13, 2012 I've got one, do you need the bezel as well and do you need the knobs as the centre one comes off easily, got a slight break in the plastic. Quote Share this post Link to post Share on other sites
too hot 0 Posted August 14, 2012 I don`t need any knobs I have loads !!!! What do you mean by bezel ? The cover with the colours directions and speeds??? If so no I don`t need that either!! Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 15, 2012 OK so you don't need the bezel, thats fine. £30 posted ok? I have tested all three rotary knob/mechanisms before I removed it. Dave Quote Share this post Link to post Share on other sites
too hot 0 Posted August 15, 2012 OK so you don't need the bezel, thats fine. £30 posted ok? I have tested all three rotary knob/mechanisms before I removed it. Dave Ok with the panel out of the car and looking down on it,can you check the two metal sliders under the left hand cog(this controls the direction of the airflow.) They both should have some resistance to pushing them from side to side. Experience shows that the lower slider will probably be loose and freely move back and forth. Can you check this out for me before I commit ???? Thanks Jonny Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 18, 2012 Jonny, All checked out ok, the teeth on the wheels are all intact and work perfectly, there is no play at all. Dave Quote Share this post Link to post Share on other sites
too hot 0 Posted August 18, 2012 Jonny, All checked out ok, the teeth on the wheels are all intact and work perfectly, there is no play at all. Dave Cool thats great if you can p/m me payment details I will Paypal you payment if that suits? Quote Share this post Link to post Share on other sites
