Corradochris16v 10 Posted October 27, 2012 Hi all just replaced the cold start valve on my kr as previous owner claimed it wasn't working but after I changed it I followed the plug and noticed there was a spare connector not attached to anything I can't find any part it could go to its resting near the oil filter be much appreciated if anyone can tell me anything about it! Here's a pic Quote Share this post Link to post Share on other sites
Yandards 0 Posted October 28, 2012 Short answer, no. Its for the additional instruments gauges that were an optional extra the live in the centre console. ---------- Post added at 1:22 PM ---------- Previous post was at 1:22 PM ---------- Short answer, no. Its for the additional instruments gauges that were an optional extra the live in the centre console. Quote Share this post Link to post Share on other sites
Corradochris16v 10 Posted October 28, 2012 Phew thanks mate funnily engough was looking at getting some extra gauges do you know gauge fits in the plug? Quote Share this post Link to post Share on other sites
Yandards 0 Posted October 28, 2012 Phew thanks mate funnily engough was looking at getting some extra gauges do you know gauge fits in the plug? There should be 2 plugs IIRC, they are both for the oil pressure sensor, the other stock gauge is the amps one and that just takes a feed from the fusebox. Quote Share this post Link to post Share on other sites
