timthetinyhorse 0 Posted January 23, 2013 Looking to buy a code reader for my 1993 VR6 (i presume its OBD1??) Can anyone confirm what i need or recommend me one that will do the job without breaking the bank? Cheers Quote Share this post Link to post Share on other sites
seanl82 23 Posted January 23, 2013 If your only after basic fault finding, download VCDS Lite from the Rosstech website - its free, and get a generic ebay lead for less than a tenner. :thumbleft: Quote Share this post Link to post Share on other sites
dannyboy 0 Posted January 23, 2013 Obd 1 is just two pin isn't it? The car has to have obd 2 to use the generic cable.u need a adptor with that cable too.blink codes is the cheapest way if function is available( should be) Quote Share this post Link to post Share on other sites
Stonejag 10 Posted January 25, 2013 Obd 1 is just two pin isn't it? The car has to have obd 2 to use the generic cable.u need a adptor with that cable too.blink codes is the cheapest way if function is available( should be) All Corrados were ODB1 from the factory but mine has the later rectangular 18?-pin connector, as did all the late ones IIRC. It's just a connector change, so get a generic cable plus an adapter cable for the pair of 2-pin connectors if you need one. Stone Quote Share this post Link to post Share on other sites
