fry 0 Posted April 16, 2003 Just prchased a 50 mm inlet manifold thinking of polishing it to make it look nice!!! Anyone got any tips for D.I.Y ? (by that i mean tools etc) or is it less hassle to get it done by a pro..??? cheers Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted April 17, 2003 It's a time consuming job. First thing to do is get it bead blasted (not sand!!) professionally and then you need to sand the main tubes down with varying grades of wet and dry. Then you need to do the intricate areas with a dremel. Personally, I'd get it powder coated as once polished, you need to buff it regularly unless you coat with some heat proof clear laquer. Kev Quote Share this post Link to post Share on other sites
fry 0 Posted April 17, 2003 Cheers for the reply.. After all that I think I may just give it a real good clean then fit it !!! I cant be arsed with all the polishing, its enough having to do the car !! :? Quote Share this post Link to post Share on other sites
W3RKD 0 Posted April 17, 2003 you can buy all the lit for the job from here... http://www.frost.co.uk/acatalog/Index_P ... ng_21.html Quote Share this post Link to post Share on other sites
