othemadnesso 10 Posted August 23, 2014 Right new to all this but recently got hold of jakes of the fourms vr and haveing a few probs with sorting the abs. just done 288 converton but to cut a long story short we couldnt bleed the car up properly so we were going to rip the abs out and change the master cylinder to a 23mm none abs item but now managed to get it ok so thinking of keeping it as it is. only prob is its had an 2.8 24v convertion and the odb port converted to odb2 but only wired in to the engine so cant get in to the abs. my question dose anyone no the colours of the abs odb wires as there are a few laying around next to the port. and if i could wire them in to the odb2 port, im no wiring guru so if its a case of a pain in the arse im just going to rip the lot out. any help would be aprecated cheers Rich :thumbleft: Quote Share this post Link to post Share on other sites