fendervg 33 Posted February 8, 2015 Shiny new radiator in place - it is a Hella one - seems pretty good quality. Now filling and re-pressurizing the cooling system and checking for any leaks. Fingers crossed... Quote Share this post Link to post Share on other sites
fendervg 33 Posted February 8, 2015 Can only get two screws back in to the reinforcing bar for the front splitter - any tips? Quote Share this post Link to post Share on other sites
diarmaid16 1 Posted February 8, 2015 Were they all in place before you took it off? Make sure splitter is fitted to the bumper properly, then just try to clamp the bar as well as possible while putting the screws in. Never really had any trouble with this. Quote Share this post Link to post Share on other sites
fendervg 33 Posted February 8, 2015 Yeah, all five were in before. Just two holding it on at the minute, one at the end and the centre one. I will try taking the whole thing off again and lining it up properly and see if that makes a difference. Quote Share this post Link to post Share on other sites
