Jim 1 Posted April 7, 2015 This might sound like a weird question, but I'm asking on behalf of a friend. Does anyone happen to have a diagram for a VR6 showing the routing of all the hard lines - so which outlet from the ABS pump goes to which caliper, etc and the connection from the master / slave cylinder, into the compensator valve, etc. So a plumbing diagram, not a wiring diagram.. Thanks. Quote Share this post Link to post Share on other sites
ChrisL 17 Posted April 7, 2015 I might have something in all my files, I'll have a look. If not, I have enough pictures (and a car in the garage) to sort a sketch for you Jim. I'll sort something tonight. Chris Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted April 7, 2015 Got these from vagcat, i had them all downloaded on pc already for some reason Might be worth a double check as i've not looked at them 100% properly Quote Share this post Link to post Share on other sites
Jim 1 Posted April 7, 2015 They're very helpful mate - thanks. Chris - don't worry too much if it's a big job but if you can put something together it'd be most helpful :) Quote Share this post Link to post Share on other sites
ChrisL 17 Posted April 7, 2015 The VR6 has 6 ports out of the front of the ABS pump and 1 has a bigger connection nut. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted April 7, 2015 The VR6 has 6 ports out of the front of the ABS pump and 1 has a bigger connection nut. Yeah, just checked old photos and you are correct, not sure what the diagram i posted is showing then.. Confusing Some of my old pics, not sure if they help at all? Quote Share this post Link to post Share on other sites
