How difficult is it to .??

[blackrs2000custom 10]

I'm going to fit new rear beam bushes . Dropping the beam out but how hard is it to pull the new bushes through the hole ?

Cheers Neil

[g0ldf1ng3r 13]

I'm going to fit new rear beam bushes . Dropping the beam out but how hard is it to pull the new bushes through the hole ?

Cheers Neil

 

hi Neil

 

I believe to remove & refit the bushes you will need a press & can not be done by hand, or is extremely difficult

 

from personal experience I would recommend preparing to replace the brake bias valve as they can be very troublesome to disconnect so as to allow the rear beam to drop ok

 

also, avoid poly bushes etc for the rear beam & use the standard OE bushes as they are designed to flex somewhat

[Jim Bowen 1]

I borrowed a sealey bush tool from someone on here, made the job quite easy really. He had modified it a little, but its basically a thread bar with some bits on it you wind up.

[blackrs2000custom 10]

Got a threaded bar and various end for it just wondering how tight it is to pull through

[swiftkid 1]

I think you have to pretension it as well when you put it back on, something I'll need to check when I do mine in the not too distant future.

 

BTW, your username "blackrs2000custom"... MK2 escort? if so, pics please!

[blackrs2000custom 10]

I think you have to pretension it as well when you put it back on, something I'll need to check when I do mine in the not too distant future.

 

BTW, your username "blackrs2000custom"... MK2 escort? if so, pics please!

 

Hope you like

[STU175 0]

i had to renew brakelines when i done mine. they wouldnt come out of compensator

[swiftkid 1]

Oosh, that is absolutely beautiful! So very jealous. Would love one, if I ever got rid of the corrado that is what I'd want