pj027235 10 Posted June 1, 2017 I have read many posts on concerns with high oil temp, but mine seems to be too low. It rises slowly compared to the water temp and sits stubbornly at 80 degs with a water temp between 95 and 100. It used to be around 100. I have cleaned up the sender and the wiring seems ok. If the sender was kaput would I get any reading at all? Quote Share this post Link to post Share on other sites
GrahamU 5 Posted June 1, 2017 Oil temp does rise slower than water, so dont worry about that 95 to 100 seems high for water though, I'd expect 90 Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted June 2, 2017 The temp gauges for water vary quite a bit. Sent from my SM-G930F using Tapatalk Quote Share this post Link to post Share on other sites
pj027235 10 Posted June 2, 2017 It's the oil temp that's puzzling me Quote Share this post Link to post Share on other sites
