Shell cuts

[tony_ack 0]

I need to do quite a bit if rust repair on the car. I'm looking to weld myself, but will need replacement panel cuts for the hits that need welding. I know that some may be available through classic parts, but I'd like to see what's out there first

 

The bits I need (rust free) are:

Nsf outer sill - front edge to 6 inches back

Nsf inner sill at front, about 8 inches back, and extending into jacking point area (prob about 6-8 inches square in total)

Nsr inner sill, this is the bit from the bottom of the car into the wheel arch

Offside front inner sill, behind the front wing

Rear apron including area around the badge and under the rear bumper

Offside rear side panel, below the bump strip, to the top of the outer sill (Inc part of outer sill).

 

Will post pics of specifics if anyone thinks they can help, let me know if you have anything, cheers

 

 

Sent from my MotoG3 using Tapatalk

[lilfuzzer 1]

hi tony should be able to help with couple of bits send me some pictures

[tony_ack 0]

Sorry for the delay, here we go:

 

NSF outer sill

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141102730_zpseuzylqt8.jpg

 

NSF Inner sill/jacking point

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141111707_zpswwrrdz5w.jpg

 

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141126871_zpsspkxf3t8.jpg

 

NSR sill/inner arch

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141202618_zpsglawr0pj.jpg

 

OSR arch

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141303143_HDR_zpsw40ovknb.jpg

 

OSR shell hole:

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141314876_zps1sa7gey7.jpg

 

OSF sill (extends under wing)

http://i716.photobucket.com/albums/ww165/tony_ack/IMG_20170702_141329821_HDR_zpsyumnbwbz.jpg

[lilfuzzer 1]

Pics not working my end mat

 

Sent from my SM-G357FZ using Tapatalk

[tony_ack 0]

Hi Chris, sent you an email with the pics

 

Sent from my MotoG3 using Tapatalk