Olivernuttall 10 Posted April 8, 2019 After 2 years sat in my workshop and various repairs I finally got my 2.0 16v out washed and managed to start it ready for a MOT. I had No issues at all. So I tried to start it yesterday so I could take it for an MOT and this time it wouldn't start. When I turn the key all I hear is one click. Tried jump starting of a van and still Just the one click. Any help would be much appreciated, I'm far from an expert on cars, especially electrical problems so please bare with me Thanks in advance Quote Share this post Link to post Share on other sites
Olivernuttall 10 Posted April 8, 2019 I'm thinking it's a problem with the starter solenoid or the wiring to it. Quote Share this post Link to post Share on other sites
Simeon 0 Posted April 8, 2019 I reckon it'll be your earths or your starter motor as it has been sat Disconnect the battery and then remove and clean all your connections to starter / alternator and most importantly the earth to the gearbox / battery tray. If still no joy, a couple of taps on the starter motor perhaps to see if it goes, then you're in new / refurbished starter motor territory. I presume it bump started ok? Quote Share this post Link to post Share on other sites
Olivernuttall 10 Posted April 9, 2019 Thanks. Il have a go tonight. Not tried bump starting as where it is isn't ideal. But it ran perfectly fine the previous day. Quote Share this post Link to post Share on other sites