abvsean
-
Content Count
8 -
Joined
Everything posted by abvsean
-
I dont know what im doing either,i got another from scrap yard today and bought a 3legged puller from machine mart,what a crock of ****e they are for removing the spline.the lips is far too small to get a decent grip on. when im refitting the spline i cant get it far enough onto the shaft for the thread to stick far enough through the steering wheel so i can get a nut on.
-
Vag-Hag says he has one i can have,hes sending me some piccs,hes a good lad. Thing is im an impersonator,my vr6 is in a mk2 golf and trying to find out if they are the same?? I did have a corrado g60 though few years ago now like. Well the moral of this story is dont brae the column down to pop off the spline as its a ball ache
-
got it all out and trying to hit it back to original position but its not giving me enough length on the spline/steering wheel end to fit wheel back on. are corrado ones the same as mk2 golf ones?
-
so do i need to take it out of the car to do this? pull the inner out then hit it back into position?? cheers for the help,its been a hellish job doing the igniton barrel and it wasnt the cause of my fault haha at least its done though!
-
Thats the ticket,just bought a can of it
-
ah ball sack they didnt say that in the D.I.Y HOW TO. Its from a n reg vr6,no height adjustment on it just a coloumn will it not return then....ever??i cant be faced taking all that apart again
-
Hi folks I recently swapped my igniton barrel and to remove the collar i hammered the column down to pop it off,i pulled it back but now the steering wheel wont fit is there anything i should watch for or loosen to make it easier to return as the threads on the shaft dont come far enough through the steering wheel to get the nut on any help woul be greatly appriciated as i need to get sorted so i can drive the dam thing!
-
Hi i am looking for a steering wheel for my corrado vr6 I am after a standard vr6 one un worn if possible or a momo one with a boss Thanks