mrbeige

I've got a bolt that goes through the back of the box into the panel behind. I think the velcro wouldn't be strong enough :?

track down a 2L 16v audi 80 in autotrader, local ads, e-bay etc... doesn't need to be MOT'd just running so you can hear the engine, then stick the bottom end in your corrado, with the exception of the sump and oil pickup pipe off your old KR it's plug and play and you'll have a good 150bhp :) there's 3 or 4 on e-bay at the moment, shouldn't cost you more than a couple of hundred quid if you can fit it yourself. Is that the 6a engine code?

Minging!

Mk1 Golf GTi's, cos they are the original hot-hatch! My Corrado, cos, well its a Corrado Dodge Charger, cos its super cool american muscle

mmmmm borbets 8) :lol:

Why don't they stick that engine in the golf?

I think so yes, gonna get it built up and teted with standard code, then re-do, which should be a bit of fun! Nice one, wish I could code in C (++++or whatever it's in :)) - If you want to make some money though, you should seriously look into TPS based map switching. it's not currently available but a lot of guys on the msefi forums running ITBs are crying out for software that would run speed density under a certain throttle position and alpha n above. If you knew your way around the code with confidence, I reckon it would be very simple to apply. This would mean that ITB applications can have the best of both worlds - stable fuelling at part throttle and performance at 70% - WOT I can't see that being a problem theoretically as MS is capable of dual maps, normally for people who want to run nitrous or water injection. A further calibration (probably 2D] could possibly do it too. If you had a map modifier based on throttle position then that could work. Gonna get the bugger first and running on the bench with the standard code, then I'll start having a play about with new code.

I think so yes, gonna get it built up and teted with standard code, then re-do, which should be a bit of fun!

That might well be very helpful! Cheers dude

You can also use early VR calipers as they take a 280mm G60 disc :)

I've order MSnS and the ISV daughter board. :? Who is midnightGLi? Is he on the MS forum?

Right guys, I need a pinout for a 9a ECU. I'm going to fit Megasquirt on my car, but would like to retain as much of the original wiring as possible, so that my clocks still work etc etc. Anyone got the info??

I think that is a piss-sat :lol:

Erm, I might have just ordered a kit!! I'm totally skint, can't afford it, but been meaning to do this for ages, so, sod it!! 8) 8)

Good skills that man 8) I'm planning on doing this to my 16v, but need some other bits like ABF mainfold, injectors, fuel rail,throttle body and a wideband. After which should be relatively easy to do. Thinking of putting my own code on mine, as I've had a look at the standard code, and although it works well, it could be better written :wink:

Good skills dude, glad you found something that was up to standard :wink:

Totally gutted for you mate :( Just make sure you can buy it back off the insurance comapny and get another G. drop your engine into it and you'll have a spare too. At least you could recoup some money if you then break it!

Cheers Andy, glad you are happy with it!

Dude, you are a mentalist! Fair play to you 8) 8)

I'm 29 and I've had: 1 Mk2 Golf 1.3 2 Mk1 Golf GTi's 1 Corrado 2.0l 16v (Mrs Badcrumble!) :D

Roll-up roll-up get your shift lights here! :lol:

slant I've been to Milford, funnily enough, went to visit a supplier there called Saint Gobain Ignitor Products (Ceraminc Hot surface ignition stuff) when I worked for my Dad!

The LED's are to be mounted like in the Vid of my car. Send my a PM dude. Yeah, no worries dude

Absolutely! We have enough PCB's for 20 of them at the moment, and 5 are already provisionally sold, but if there is a lot of interest, then its not a problem to get more done.

Right, they are now available to anyone who wants one!! £50 inc P+P Also offer a fitting service where it is integrated into your cluster - no need to cut wires or anything! £62 inc P+P Here is a piccie