Jump to content

maikki

Members
  • Content Count

    13
  • Joined

Everything posted by maikki

  1. maikki

    Sunroof problem

    In wheeler dealers it seemed to be easy job to take off sunroofs inside panel.
  2. maikki

    My -91 G60

    Here's better picture about steering wheel and new brakes and here's winterlook. We already had lastweek -10 celcius and today +10 :scratch: Wheels are from MKIII GT with 5mm spacers. Tyres Studded Bridgestone Noranza2 185/55-15. InPro angel eyes have good lowbeam but high beams are useless so little overkill was needed. NBB 225's with 35w xenons. 3lux light pattern goes as far as 881m and is 75meters wide at 150m. I live up north and reindeer area starts about 40km's from where I live so you really need good lights. We have this saying here:"fits like binoculars for a moose" which is quite right with rado now Waxed with sonax polymer netshield
  3. You get 160-170hp from 9A with KR or ABF cams and good exhaust
  4. maikki

    My -91 G60

    I've done little bit this and that in last two months Temp gauge started to work after disassebling it and putting it together. Installed stereos. Zetec amplifier had something mixed because front and subchannel filters were somehow mixed. I bought SPL Dynamics S-4005. I changed water outlets from block and managed to broke g-laders oilline. Managed to buy last one in Finland...of course i could have get one from ebay but I got it next day. I refurbished steering wheel. Not good but much better than before Last weekend I did rear brakes. Luckily I could do it in my friends shop and use induction heater because bolts were so stucked. both calipers were stucked so here's brake pad...quite well used :) Installing new splash shield was also pita but there wasnt much left from old one So refurbished calipers, discs, pads, bearings and brake fluid
  5. Fairy is good for stripping old wax but if you use it regularly it will dry tve paint.
  6. LB7Z is colourcode satinsilber = satinsilver
  7. SRP doesn't dust if u apply it by machine (DA-polisher). SRP is outdated product which was good/excellent product 15 years ago... Products I use prewash: Bilt Hamber wash: Meguiars shampoo plus / Silco twister turbo clay: valet pro and citrus bling as claylube polishing: coarse: Evercoat triple cut medium: Meguiars ultimate compound polish: Meguiars 205 / Dodo Juice lime prime fine: Evercoat triple gloss glaze: Poorboys black hole / diamond white wax: carnauba: Dodo Juice Waxes polymer: Meguiars #16 wheels: bilberry and meguiars wheel brightener plastic: meguiars trim detailer / hyper dressing tyres: Presta tyre dressing interior cleaning: Meguiars APC interior plastic: Meguiars #40 and natural shine leather cleaning: colourlock leather conditioner: Gliptone liquid leather
  8. maikki

    My -91 G60

    Today I managed to drop it about 30mm. I have sinusitis so after that I was soaking in sweath and deathbells were ringing in my ears:bonk: In the back there's my Saab 9-5 Aero... Drivers seat needs repairing .Upholsterer must do it but I'll paint myself leather parts from seats and steering wheel. I already have Xetec Vector 350.6, Macrom M2S.61 for rear and Macrom M2W.124 subwoofer. I'm thinking Alpine headunit and Rainbow EL-C5.2 for front. When I opened sunroof it ripped the upholstery...
  9. maikki

    Sunroof problem

    When sunroof went in it ripped cloth. Before I glue it back is it possible to adjust sunroof bit higher so it would't happen again? When closed sunroof seems to even with roof.
  10. maikki

    My -91 G60

    Ball joint, front rubber mounts changed. I also adjusted exhaust. Stabilizers connecting link broke when I opened it...didn't surprise. I didn't change headlights because i ran out of time. Then I went to get MOT and was told that last owner didn't pay tax. I had to pay tax 19,28€ + 15€ to get MOT. Tomorrow we will lower front 2cm, rear 4cm and align wheels.
  11. maikki

    My -91 G60

    It's LC5U Aqua Blue Needs new paint for front bumper, hood and left wing. Last one who painted it forgot plastic primer so paint is peeling in bumper and clear coat is too soft of hard because it's full of chipmarks like someones shot it with shotgun. My friend will paint those parts in September then I'll polish rest of the car. Propably first round with Meguiars ultimate compound or Menzerna 3.02 and second round with Meguiars 205 or Evercoat triple gloss. Wax...2 coats Chemical Guys black light and then 1 or 2 coats Dodo Juice Austintacious.
  12. So here's my -91 Bought it week ago and besides few things it's in ok condition. Engine is chipped, 65mm pulley and sports exhaust which is installed by someone who's retarded and blind here's interior: drivers seat needs to be refurbished otherwise it's ok. Temperature gauge doesn't work. I already changed black sender but it didn't help so propably needs some electrical work. Outside: When bought it had terrible 17" chinatin wheels with LingLongs so it was quite terrible to drive. I have 16" Porsche Flatdiscs but didn't like the look so I bought 195/50 Michelins to Sebrings which I've had few years. Suspension is TA-Technix coilovers and as soon as I get exhaust sorted will lower it few cm. Rear lights were all black and already bought these which look much better, OEM headlights and white blinkers will be installed on Thursday
  13. Hi Just sold my -92 Scirocco GT II and bought -91 G60 Corrado needs a bit TLC It failed MOT: ball joint, front lower rear bushes and stucked brake pressure regulator. Terrible chinese made 17" alloys with 205/40 LingLongs were taken off immediately and were replaced with oem G60 wheels with Michelin tyres. It'll also need new paint for front bumper, hood and left front fender. Goods things are: good engine, rebuilt G60 charger with 65mm pulley, chipped, sport exhaust and reasonable interior with electric recaros. Pics coming later
×
×
  • Create New...