g60podd
Members-
Content Count
44 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by g60podd
-
help! 1.8 16v oil alarm buzzer coming on as soon as revs hit 2.5k
g60podd replied to g0ldf1ng3r's topic in Engine Bay
This was the test I carried out on mine and I also checked oil pressure which I now believe to be the issue. A. To test the high pressure sensor circuit and wiring (sensor for this is on the oil filter housing): 1. Disconnect the wire to the high pressure sensor on the filter housing and let it float (un-connected). 2. The oil buzzer should now come on and indicator will flash when the van engine speed is above 2000 RPM. 3. Now connect the yellow wire to ground and rev the engine past 2000 RPM… the buzzer should not sound at all. 4. If you fail either of these tests you have sensor issues, wiring, alternator wiring, or instrument cluster issues. To test the sensor itself: A test light between the sensor and the positive battery terminal should be 'off' at warm idle and come 'on' as you rev to 1800-2k RPM, if the sensor on the flange is working properly. If the buzzer still sounds with the wire to the sensor grounded the problem is most likely the wiring to the instrument cluster. B. To test the low pressure sensor (sensor for this is on the cylinder head): 1. Disconnect the wire to the sensor and leave it float. 2. Connect a test light between +12V batt and the sensor. 2. Start the van and leave it idle - the light should go off - if it doesn't the you have a faulty sensor. 3. If it does and the oil light is still flashing then you have either a wiring fault or the engine speed signal from the alternator is missing. So, the long and short is: A flashing oil light, on its own at engine speeds of A flashing oil light and buzzer are both a function of the high-pressure sensor on the filter housing. If this is happening you should look at the high pressure sensor and associated wiring The high pressure sensor on the oil filter flange is only monitored when the engine is running at or over 1800-2000 RPM. A flashing oil light at all engine speeds (and without buzzer above 2k RPM) is indicative of a missing engine speed signal (alternator 'w' terminal) - check to make sure that the instrument cluster is getting the correct engine speed signal from the w terminal of the alternator John Sent from my iPhone using Tapatalk -
I've had these traumas, I feel your pain, hang in there bud [emoji106] Sent from my iPhone using Tapatalk
-
Sounds Lots Canadian to me [emoji23] I have some very good Canadian friends and they all love a nitpick [emoji23] Welcome! Sent from my iPhone using Tapatalk
-
Heritage Sent from my iPhone using Tapatalk
-
Welcome Sir [emoji4] Sent from my iPhone using Tapatalk
-
[emoji4] Sent from my iPhone using Tapatalk
-
John Mitchell isn't too far bud Sent from my iPhone using Tapatalk
-
Welcome, where are you located ? Sent from my iPhone using Tapatalk
-
VW Corrado Chat on FB is good all round info and bits [emoji106] Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
Got mine too [emoji106] thank you Sent from my iPhone using Tapatalk
-
If they are interchangeable I will take one anyway but I don't know how to PM. I find this Tapatalk really confusing if I'm honest [emoji23] Sent from my iPhone using Tapatalk
-
Many thanks for pic. Different to mine unfortunately Sent from my iPhone using Tapatalk
-
I'd like one if it will fit mine regards John Sent from my iPhone using Tapatalk
-
Have you got s picture please ? Sent from my iPhone using Tapatalk
-
Hi Guys If you speak with JMR, John will tell you that grease is the devil on these mechanisms so I cleaned all of the grease away and just use the spray pictured above. No issues ever since [emoji106] Sent from my iPhone using Tapatalk
-
This is what you need bud, just a tiny amount though and it will glide along Sent from my iPhone using Tapatalk
-
Yes yes and yes Let me know when you need deposit [emoji106] Sent from my iPhone using Tapatalk
-
Hi there I would be interested, do you have any further detail ? I'm on the Wirral and have a Corrado G60. Thanks John Sent from my iPhone using Tapatalk
-
Thanks mate Sent from my iPhone using Tapatalk
-
Looks a good price but don't want to be lumbered with the wrong one half way through the job [emoji51][emoji849] Sent from my iPhone using Tapatalk
-
Is this the correct one for my G60 ? Sent from my iPhone using Tapatalk
-
That's pretty [emoji106] Sent from my iPhone using Tapatalk
-
Speedo Binnacle Cover Reproductions - NOW AVAILABLE (December 2016)
g60podd replied to Jim's topic in Forum Group-Buys
Received, cheers Bud Sent from my iPhone using Tapatalk -
Speedo Binnacle Cover Reproductions - NOW AVAILABLE (December 2016)
g60podd replied to Jim's topic in Forum Group-Buys
Yes please bud Sent from my iPhone using Tapatalk