Jump to content

suisideg60

Members
 View Profile  See their activity

  • Content Count

    31

  • Joined

Everything posted by suisideg60

  1. suisideg60
    No pm in mine either :-/ I've come on to the full site to try again lol
  2. suisideg60
    I think I sent you a PM. But I also posted thIs already and it wasn't here lol
  3. suisideg60

    Hi mate, Paypal ok?

    Jon

  4. suisideg60
    I'll take the other pair please :) Jon
  5. suisideg60
    Ha ha ha dammit I thought was the GTI Spring festival 😂
  6. suisideg60
    Did anyone go? I saw some people taking pics of mine in the car park/drive in/out and was wondering if anyone on here how they came out? I did meet a few fellow Corrado owners too but don't know if in here or not lol Jon
  7. suisideg60
    Sorry they went on eBay a couple of weeks ago - sold for £370
  8. suisideg60
    Not my best pic just keeping the thread alive until I get some good ones 😂 First deep clean and lowered a little...
  9. suisideg60
  10. suisideg60
  11. suisideg60
  12. suisideg60
  13. suisideg60
    Been on my car for approx. 50 miles (bought them, sold my porkers that weekend and then a set of "cheap" schmidts came along the following week so bought them and took these off!! Pics to follow, £550 ono west sussex (cost me over £600) Jon
  14. suisideg60
    Thank you! :)
  15. suisideg60
    Hi all. I need a pair (L&R) of the brackets that the rear beam/axle hangs off. The cleaner the better :) Thanks, Jon
  16. suisideg60
    Faulty new switch/sensor/sender (black 2 pin on mine) deffo then must've splashed coolant in the plug whilst performing the old switcharoo putting the original one back in!
  17. suisideg60
    Bargain!!!
  18. suisideg60
    I sorted it, thanks :'-D
  19. suisideg60
    I've just replaced all three sensors/senders in the thermostat housing (yellow 4 pin, blue 2 pin, black 2 pin) on my VR6 and as soon as I turn the ignition both fans come on at full (I think!) speed!! I unplugged the connector on the new black sensor and the fans went off. I plugged it in to the old (just loose on the side) black sensor and they stay off. "Ah! Faulty new sensor" I thought and plumbed the old one back in. Turn ignition on and WHOOOSH! Fans are on full speed again?!?! Am I supposed to do something else?? There could be a little coolant on the plug (as it went everywhere as my sausage fingers fumbled the connector in) so I've sprayed butt with electrical contact cleaner and am leaving to dry but thought I'd check with you guys if there's something else?? Ps. I just changed it while I was changing the blue and yellow as they looked old and crap. There wasn't an issue (I don't think) with them before. The fans certainly didn't come on all the time the ignition was on. Cheers, Jon
  20. suisideg60

    Hi mate. The front panel (that sits on top of cross member), rear beam (with brackets/hangers if easier?) and front subframe. Mine are rusty as hell so just gathering second ones then will get powder coated, built up and polybushed before swapping them in.

  21. suisideg60
    I've PMd as travelling to get everything I need in one go may be worth while.
  22. suisideg60

    Hi mate,

    What colours (front panel) your car? And what condition are the subframe/cross member/rear beam bits in? It's a 6hour-ish round trip but depending on condition and prices may be worth it.

    Cheers,

    Jon

  23. suisideg60
    Bit far out to be honest
  24. suisideg60
    On eBay end tonight. Item: 221960607632
  25. suisideg60
    In decent condition and local enough to West Sussex I can view/collect. Mine look like they've been sat in Spongebob's garden...
×
×
  • Create New...