reggiebaby
-
Content Count
145 -
Joined
Everything posted by reggiebaby
-
Just wanted to say big thanks top bloke got 2 really good condition front wings, the old valver is starting to take shape.
-
Tempted to go with SGS can get 100L 14cmf and 3hp motor for under £250. At the end of the day not going to be used much.
-
Thanks, anybody used or know of SGS or cobra, come in my price range.
-
Ouch bit more than I was hoping to spend.
-
Hi looking to get a compressor to do a bit of spraying and use air sander, anyone got any recommendations looking to spend £300 ish.
-
Ok OM must have posted while I was typing.
-
Have a look on eBay got to be the lowest mileage available, not sure how to post link.
-
Just come across this thread are these available now or is it still in discussion. Thanks
-
Hi all got the front end off the car at the moment sorting out all the rusty bits. Is it a good idea to replace cross member bushes and the front engine mount? Not planning on changing the other mounts at the moment, also any thing else service wise I should look at while having access. Thanks
-
Ok got it out no problems, looking for a replacement if anyone can help think the part number is 535199171G. Thanks
-
Ok thanks, so to get it out will need to support the engine and remove the mount. It needs to be gone more rust than metal.
-
Hi can anyone tell me what the panel is called that is on the bottom of the front cross member/rad support, or is it all one panel. Thanks
-
Hi all, anyone know if and where to get hold of the adjuster screw on the fog lights?
-
Exhaust any good?
-
I would love to collect these but live in Devon so just not feasible, The courier I have contacted specialise in moving car parts not cheap but hopefully a little more careful. Last time I had a body panel sent bubble wrap and card board with fragile written all over it was fine, let me know what you think re price to include packing obviously sent at my risk. Thanks Simon
-
Could really do with getting hold of the wings if still have them, I can get a courier to collect but not pack, happy to pay for packing tho. Cheers
-
Exhaust any good? You never know. Cheers.
-
No worries, long shot I know.
-
Exhaust?
-
Pm sent.
-
Hi all, anyone got a drivers side rear brake caliper for my 1990 16v?. Happy to referb
-
Sorry mate still interested in the wings but struggling with courier, do you still have them?
-
Yep will contact gsf tomorrow and see if I can go local to exchange and test. Thanks
-
Thanks thought so, the disks came from gsf jurid and bearings are meyle.
-
Hi guys, can any body help iam fitting new wheel bearings into new rear disk and I think something's not quite right, when I put the front bearing surround in it's not very tight I can almost push in with my hand and it spins when in place. I am not expert so any advise would me much appreciated.