blackrs2000custom

Arrived the other day, thanks

Yes and Yes

Old thread but they took it back and sorted the pump but I had to make a new connector

I will take the springs please, PM sent

PMd you Thanks

Hi Anyone got a spare plastic door handle seal ? The flat plastic part that goes between the door and the handle, Lock end. Must be able to pop in a jiffy bag and send and take paypal payment. Thanks Neil

Hi yes willing to wait till then , too cold to fit them at the moment anyway.

Hi looking for VR6 front lowering springs but will buy a full set if required. H&R or eibach preferably, must be willing to post or located in southern Scotland. WHY ? Pm me Thanks Neil

Vr6 bonnet, been stripped back to metal on top, couple of repairs done properly, etched primed then 2k high build and blocked down ready for colour. £50 collected . Located in Penicuik south east Scotland. Can't get tapatalk to upload pictures for some reason but can send via Facebook or whatsapp Thanks Neil 07760230311 Sent from my SM-G900F using Tapatalk

Just seen it, couldn't believe it. it's like a mirror image of the cars I've owned. Had a yellow mk2 rs2000 and currently got a black one, recently had an bmw e30 318is , my brother owns it now, and currently own a Vr6 same colour as on the programme.

Wished I had taken some pictures now so I could have done a diy guide. Doh

Well after getting my car on the road after doind a load of work over the last 3 months the sunroof decided to pack up on a rare sunny day in Scotland. Having spent a fortune lately I was determined to have a go and see if there was a chance of repairing it. It did work sliding and tilting before and it stopped in the tilt position and needed winding back manually with the allen key. First off I checked voltage at the 7 pin connection one wire at a time .live ,negative, central locking feed , back director, tilt and forward direction. All was good so switch and voltage feeds were good. Next removed the motor assembly from the roof removed the black plastic cover and desoldered the motor from the pc board . Cleaned the armature which was covered in black carbon and grease. The brushes were good and had plenty of life so resoldered it back on the pc board. Reinstalled it but no joy , then noticed by pushing on the pc board it worked." light bulb moment " dry solder joint ! Resoldered everything includind relay joints under the black connector and plug ,problem solved woo hoo something that didn't cost money for a change. Cheers Neil

Pleasure doing business with you, I'll be back when funds allow. 😉

I would take the springs Cheers Neil

Old thread I have come across , wonder how many left in Scotland nowadays Anyway I'm I Penicuik , Bog Standard 1995 Blackberry VR6 Cheers Neil

I'm in Penicuik, is the bonnet available and dent free?

Hope you like

Got a threaded bar and various end for it just wondering how tight it is to pull through

I'm going to fit new rear beam bushes . Dropping the beam out but how hard is it to pull the new bushes through the hole ? Cheers Neil

Corrado VR6 abs unit wanted part number 1H2 614 217 A Help pleeeease Cheers Neil

PM sent

Interested,do you know if these are plug and play or do they need programming in. Cheers Neil

Still waiting on them coming back to me , I've had to send pictures and a manager is supposed to come back with an answer.

Help I need a replacement fluid inlet connector the yellowish straight one for a corrado vr6. Sent my pump away to bba remanufactured and it came back broken due to incompetent packing and ham fisted couriers UPS. Can anyone help would even consider a knackered pump with intact fitting Thanks Neil