DUBVR6

Just had the heaters on for an hour in the car and there seems to be no lost of coolant or hot air. Any ideas guys

Guys, I know i have checked through all the threads and cannot find how to check if the heater matrix is gone!!! Car has been parked for about a month and today the whole passenger footwell and rear was flooded. Started the car and the heater's are blowing hot air with no problems on all the settings. I have read it could be to do with the Heater Scuttle 'Foliage Cover' Seal, i have poured water over the area and checked for leaks under the glove box, but cannot see anything. Checked door membranes all fine. A bit buffled where the water has come from. All advise appreciated.

Got it fitted today adn the guys had no problem with the lamda. The pnly prob was ot was slighlty short. So had to cut a piece from the CAT. But now there is definately a difference and really kicks off after 3000 revs.

Will be getting the cat fitted on saturday 28th, so will let u guys know the difference. I bought it from awesome GTI store for £73 including VAT and postage. Need to get the gasket and clap from vw which in total will cost you about £12.

Guys, In the process of buying a milltek decat pipe for a VR6. Seen a few threads where they have quoted it for £55. Where can i get it for that price. Cheers

yep, took it to the specialist, did every check in the book. And yep it was the coilpack gone. HAtE COILPACk

Hi Guys Got the following prob: - Leads and plugs all changed pretty recently It's missing like no-ones business and the exhaust is absolutely honking of fuel most markedly after start up. It's idling fairly roughly/noisily. The whole car shakes. Also the exhaust seems to be getting very hot, it "tings" like hell after any kind of running and the centre consol gets pretty warm too !! Taken it to the local VW specialist and says it an internal engine problem??? Please advise

HI, In the process of removing the catalyst and want to know the best decat pipe on the market for a corrado vr6. Where to buy and how much?? Cheers

Bally from Milton Keynes........Top Bloke and Top Deals. Sorted out a rear bumper for a tenner and a polished manifold for 50. Now thats a bargain. Respect Bally;)

sweet engine bay and a top motor, a pleasure to see it at no rice!!!

cheers lads, il check that tonite. is there nething else i should check for Any suggestions????????????

lol Gta watch out incase the snake crawls up me trousers ;) its coming fom the drivers side dash and u can only hear it once it hits over 60mph hw u check the vacumn thingy and will dat make a noise after 60mph???

had a new screen put in, but checked all the seals looks fine

Guys, Just come back from no rice and when i do over 60 mph, i start to hear a hissing noise from the dash area??? Can't pinpoint it???? Help please

wna get toad fitted and looking for sum1 quality in the slough/berksire area