dubboy

Looking at running a set of Design 90's on a Corrado G60. They are 7x16 for the front & 8x16 for the rear. What size adaptors are required 20mm or 25mm Also what is the best tyre combo for these wheels as people seem to be running different ones. Looking for something that will sit nice in the arches but not looking for the overstretched tyre look. I know this has been probably covered many times, but all I can find is info people running 8x16 all round with varying tyre sizes.

These are 3 piece alloys. So was wondering if I could keep the centre lattice section and by new lip and a narrower back section of the wheel to make a more friendly ET.

The poke really as the adaptors are gonna make negative offset on the 7x16 and 4mm on the 8x16 so guessing are gonna stick out the arches to much.

I have been offered a set of BBS RS Alloys, which have come off an old BMW 6 Series. They are 3No. 16x7 ET11 & 2No. 16x8 ET24. As these are 3 piece split rims can anything be done with them to make the offset more friendly for a Corrado. i.e. a narrower back section of the wheel? If they could I know they need a 20mm hub adaptor so would getting them to the offset of Design 90's make them fit? Or have I not got a chance of making these fit?

Hi Guys I am creating an advert to appear in various magazine for Andy at PSI Tuning. I am looking for some interesting high resolution shots of Corrados that I could use as an image in the advert. So I am appealing for anyone who has work done by PSI or would like to see their car in an advert in a magazine to email me photos to mailto:[email protected].

Hi Guys I am creating an advert to appear in various magazine for Andy at PSI Tuning. I am looking for some interesting high resolution shots of Corrados that I could use as an image in the advert. So I am appealing for anyone who has work done by PSI or would like to see their car in an advert in a magazine to email me photos to mailto:[email protected].

Cheers guys thanks for the help. Found out that they had had two wires in the wrong places.

Just got my car back from the body shop last night, when driving back I noticed the main beam was on in both the position on the headlight switch. It has an aftermarket loom put on it by Gavin (h100vw) What have the body shop connected up wrong to make it do this?

If its engine related whats could it be?

cheers guys

Waxoyled the rear arches the other week and when it was jacked up I checked the bearings there didn't seem to be much play. But I didn't spin the wheel as the hand brake was on. I'll give it another check. The exhaust is quite loud but that could be blowing as well as the car seems down on power. If it was blowing would that explain loss in power? The car is a G60.

I'm getting a deep humming noise when I get over 30mph which seems to be coming from the drivers side rear. Gets quite loud when doing 60mph, is it the exhaust blowing or a wheel bearing ?

How would I tell? I'm not sure by what you mean 'when it opens' I brought the kit from pitstop developments. There was a sandwich plate which looked like it had a cylinder at one end which I gathered contained the thermostat.

Had an oil cooler fitted along with themostat etc in December and it's doing a wonderful job on long journeys, but to good a job on the short ones. So going to work my car dosen't get up to temperature. Worried about doing any damage as I use the car everyday. Is there a way of tricking the thermostat etc into making it get up to temperature quicker? The cooler is mounted behind the grill. I have tried blocking the grill, but this not really working.

So for late reply computer went screwy. No its OK thanks I after a brand new one, don't want to risk any rust etc.

Anybody know where I can get a new drivers side front wing from that isn't going to cost me over £230? Looked at the dealers and euro car parts and not find one for less than that. Its for a 91yr Corrado.

Right makes sense then that nothing kicks in under hard braking. Just need to get rid of the light for the tow bar now, as its always on.

Do all G60 have ABS as standard? I thought they were supposed to but my 92 G60 dosen't have it, as there no light on the dash. But when I got it, the car was fitted with a tow bar (original owner used to tow his jet ski) so there is a light for that on the dash. Is the ABS disconnected when a tow bar is fitted.

don't suppose you know anywhere up here that can supply and fit a mocal oil cooler to my G60 either?

cheers matey

Need to get a front Wing and some other bits done. Anyone recommend a good paint shop in the North West?

good idea.

Anyone got a rough price for it fitted by G-werks Sorry mate Did go to the site but nothing was showing on the page, found out info was showing off the screen, well thats what you get for surfing with a Mac.

wher abouts are g-werks based

Hi Guys Looking to get a Mocal Oil cooler for my G60, what is the best size (rows) and does any one know somewhere in the North West that will fit it and not charge me the earth to do it?