VRTrickster

Hello there does anyone out there know of any rolling roads in east sussex near brighton&hove,where i can get my un modded vr6 tested for power before i fiddle with it a bit ? Let us Know cheers ! :?

Yes it does sound like its coming from that area ! Is it a good idea to give it a pressure test ? (stanbates) let me know the out come of the pump change,and how big a job it was. Did you pressure test yours ? Does anyone whats a healthy pressure ? Cheers for replies !

Hello again ! Ive got a noise coming from my engine and i cant seem to locate it ! I dont think it is tappets inless a slight one ,because when first started they go quiet pretty quick . I was thinking may be it could be the chain slapping ! I have heard ia little of this is acceptable ? You can hear it on accelaration and may be slightly more on deacceleration.The chains and tensioners were all replaced at 95k along with bottom end rebuild by previous owner! (Have invoices). Has anyone got the same annoying noise ,orany advice cheers! :) The car has now covered 118k, there is no sign of tappets being replaced from the paper work i got with the car !

Cheers ! And this looks very nice as well .Thought it might have been a de cat but its not ! Bit pricey though ,might have to leave this mod till last and save up! Cheers for the help mate! :D

Anyone got a six branch on their VR? !!!!

Hello there ! Just wondering if any one knows of any six branch ex manifolds on the market ? Or if not where i could get one made at a reasonable price! Any help would be great! Planning gradually (K+N PANEL FILTER,BONRATH POWER ROHR,INLARGED FLOWED TB,CAT BACK MILLTEK, CHIP AND REMAP). AND A SIX BRANCH MANIFOLD IF I CAN GET ONE ! Any comment on mods please ? One more! Does anyone know whats the best cams and how do they affect the MPG ? Thanks DICK DALE :)

Cheers! I was just wondering if you used a different offset could the spacing not be nessasary? I was thinking about getting 215/45 17 rubber. what rubber are you running?

Cheers for the comments guys! Looking at vwcvr6' s ,they wouldlook rather nice! And id like to ask also what are your wheels and what offset ? Are they bigger than 17",have you used spacers ? Have you lowered the car any? Any info would be good as i can state what off set and size i require! Nice one !

HiI want to get some new rims for my vr6.I was thinking about getting some replica 17" rs6 five spokes.Has anyone seen these on corrados before? What do you reckon they will look like on ?any comments please let me know cheers!

Cheers for the info mate! dont really wont to start taking the car apart just yet ! Only had it a couple of weeks!

Yeah sorry !Idont know why its ended up in this section!

What would u sugest then mate to get my vr up to about 210bhp!

Its the half tilt section. When im driving along and its making its noise, i put my hand on it and it goes! :x

i think its the flap bit if that makes any sense?

Hello again! Who can tell me the best place to go and get my vr6 tweeked? Looking at a chip and remap/tune up .Who gets the best outputs?Whos got the best prices?Whos got the best reviews? Any info would be great! NICE ONE !!

has any one else got a problem with their sunroof being noisy! how did you sort it ? it seems to be the tilt section cover. Its quite irritating! Can anyone help! CHEERS!!!!!

Yeah i did unplug the light and tested it with the engine running . I see what u mean! Ill try with them plugged in ,its just i didnt want to spoil the sealed original wiring plugs etc ! Cheers

Hello there! Just picked up my very first if not last corrado vr6 last sat. I was thinking abot uprating the lights ,as i here they only have a 9-10v feed. However when i tested my light with the multi metre at the weekend. I got a reading of about 12-13v! And yes the original wiring plugs etc seem to be untouched. Can someone tell me if they have had the same.Do i need to upright them? Do you know if some corrados dont have this problem? When i took in for a spin in the dark for the first time.The lights seemed fine, but i am comparing them to my metro that i just dumped ! Let us know ! Cheers!!!!!!!!!!

Hi there ! I was just wondering if im right , wouldnt the wiper arms on a SEAT AROSA be exactly the same as the standard LUPO? I dont think they make the AROSA any more ,nor is there GTI model. I was going to fit standard wiper arms any way to my VR6! I just thought there may be some difference in price thats all. Anyone agree with me on this one ?

Great cheers! Havnt actually picked up my first ever corrado yet ! Pick it up on sat CANT WAIT !! So if it has'nt already had the mod ,ill be in contact very soon! Thanks again

can i contact this member some how using the forum, with his username?

Saw someone on here the other daywho makes the uprated looms. Cant seem to find him! Can somene tell me who he is and how to get hold of him? Thanx! ps i think his user name was something (100) im not to sure.

Cheers mate! Ill check it out ! D you know if ordering them from SEAT would be any cheaper! The AROSA is practicly the same car?

Hello there ! I must just say what a great forum this is ! Ican see its going to help me out no end ! I was just wondering what wiper lupo wiper arms i should order for my VR6. some people say two drivers ,and some standard driver and passenger . Please could u let me know what works best before i put my hand in my pocket! Cheers !