Jump to content

dannyc

Members
  • Content Count

    77
  • Joined

Posts posted by dannyc


  1. Evening all

     

    My bro's C is running abit ruff at idle, but is fine once you get going. he has been told that there is probably a hole in the inlet pipe

     

    what do you guys think it could be?

     

    cheers :)


  2. Ayup guys, hopefully you can help me out.

     

    My C isn't starting at the mo and i think its the ignition switch. This is because for a while now when i turn the key to start it it wouldn't do anything, so i'd turn it back and try again and it would start. Sometimes it would take just one go and other times 3 or 4. Then the last couple of times i used it it took loads of attempts and now won't start at all.

    So the switch has finally packed in.

    I've bought a new switch from the sealers and attempted to fit it.

    I've removed all the trim around the steering wheel and i can see where it goes.

    I pulled out the plug that goes into the switch and plugged it into the new switch to make sure it was right.

     

    Now the bit i need to know is how to get the old ignition switch out cos its tucked up right inside the metal casing.

    do i need to take the steering wheel off?

     

    cheers

     

    danny


  3. ayup geezers

     

    my c isn't starting :mad: i think it might just be a relay but i thought i'd run it past you lot.

    when i turn the key all of the igition lights come on and i can hear the feul pump prime but the engine dosen't start. the engine dosen't even get a chance to start.

    any ideas which relay it will be?

     

    cheers :)


  4. its more the fact that corrado recs cost alot more and are harder to come by. i'd have a pair of corrado sub frames cos i'd be doing the decent thing and scrapping the standard seats!

    i'll have to have a closer look, at least i know its possible now

     

    any pics anyone while were on the subjuct?


  5. is it possible to fit any recaros into a c like out of a rs turbo or do they have to be out of a c cos of the subframes?

     

    i think the later cos the subframes seem to be part of the seat and not bolted together like on the turbos.


  6. well i was going to check every one to make sure they are all correct, a perious owner could of made a mistake aswell. i didn't notice amp numbers on the fuse box but i'll nip and check now.


  7. Ayup

    had a few fuses to change the other day but i took the old ones out without taking note of the size of fuse that came out, like 10 15 or 25amp

     

    does anyone know what takes what ampage?

     

    cheers :D


  8. heres a few more

     

    they were all this dark before i brightened them up in photoshoip, you can see the real colour of tims in the last one, it was advertised as black but in some lights it looks grey

     

    [Cs006copy.jpg

     

    Cs009.jpg


  9. this is after we lowered tims car. because we lowered so much its raised the front a bit so that will be a job for this weekend.

    I've been meaning to ask what other peeps ride height is like when its slammed on coilovers cos tims is now really bouncy. are there firmer springs available or can the damping be adjusted?

×
×
  • Create New...