G60Dan

Cheers lads. Gaz, how much are a set of reds?

Hi all, A mate of mine is looking to get some coilovers for his VR6 C. Can any of you point him to a few sites that sell the likes of H&R/Koni's etc. Thanks Dan

Just a quick question. What injectors are the G60 fitted with as STD & what upgrades are there Cheers Dan

Looks better on those wheels imo. Got yourself a nice one there!

Yeah, I know what you mean Jim :D

Here's one from National Day

I only seem to get sound :(

just trying something http://www.andytechmotorsport.com/Video ... orrado.mpg It's 4MB so not really much use to 56k modems - sorry :roll:

Thanks again Leigh, this info will be very useful! Leigh's car/intercooler http://corrado.atx-hosting.co.uk/viewto ... 1145#51145

She is, I've seen her up close. Just as good is in the picture!

leigh, that would be fantastic mate. Pic's of the intercooler & pipe work would be great!!! I want to get all my options on the table in front of me b4 I decide on what to go for, so that would be very helpful Also I remember there being some kind of de-sizing of the pipes - coming in to & out of the intercooler. Do you have the sizes please? Thanks Dan

I've heard that the front mount is the same as the mk2 1.3 golf mount. It's suppose to be a lot harder so you get less movement from the engine. Just what I have heard. Anyone else done or heard this? Or is it just some crap I have picked up? :? Dan

That would be great cheers.

Would be very interested in a full kit. Any dates set for the finished article? Do you have a ball park figure/estimate in mind what the cost is likely to be for one of these bad boys? would you be able to post more pic's of it or a link to the thread with them on please?

Defiantly looks like it, very clean! 8)

g-man, can you still get these pipes? or was it a one off?

I asked a similar question & was given this guide. Hope this helps Step 1 - measure the height at the moment between the centre of the wheel and the arch and work out how much lower you want it. Step 2 - loosen wheel bolts, then jack up car and take front wheel off. Step 3 - you will see the spring sitting on a big nut with groves in, which is on thread, this is the strut. Step 4 - you will either have two of the big nuts with groves on, or only one with an allen bolt in, acting as a grub screw (like on an after market gear knob, this stops the bolt from spinning making the car higher or lower) Step 5 - either loosen the allen grub screw, or loosen the bottom nut with a C spanner. Step 6 - measure from the base of the thread on the strut to the top of the nut where the spring is sitting on. Step 7 - undo the nut with the C spanner till the top of it is 10mm lower than where it was, do up grub screw, or tighten up the second nut against the one you adjusted. Step 8 - put wheel back on and do the other side the same way. Dan

I have found these: g-man's set up http://corrado.atx-hosting.co.uk/viewto ... 11&start=0 g-man's heatsoak answer http://corrado.atx-hosting.co.uk/viewto ... ntercooler Don't seem to be able to find complete kit - pipework /cooler thread? Thanks for all the help everyone. Dan

That is bloody good! Are you fitting it to a G60 or do you have a 20vT as per your sig? Do you think you could pass on the contact detail's & part number please mate? This sounds more like what I'm after! Where did you get your hoses made up? Do you have any pic's of the pipe work? Sorry for all the questions. Thanks for the help Dan

:shock: that is big! Where did you pick yours up? And how much?? Is the pipe work a pig to do?

At the Corrado National day I got chatting to a nice bloke about his yellow G60 (in the show & shine) & the Universal forge Intercooler he had fitted. Just wondered if he used the site? Or if anyone else could help? He gave me the dimensions of his intercooler so I could get one for myself, but I don't seem to have them any more. On the forge site there are 4 options: Type 1 680 x 160 x 74mm Type 2 610 x 160 x 74mm Type 3 610 x 160 x 95mm Type 4 645 x 160 x 95mm Does anyone else have any idea which is the biggest one I can get on my G60??? Obviously there will be some customised pipe work involved. Also regarding pipe work: where would be a good place to get my custom pipe work? Is there a site that sells universal pipes?? Thanks Dan

Will get some more of the corrado once she is back, fully functioning properly. She's getting the suspension re-set up & tracked on Saturday!! Woo Hoo!! can't wait to drive it properly again!! :D

Yeah, that was my first RST, from when I got it, to after some young lad went up the back of it. The ladies are my mates mum!! & possibly his bird (can't remember)

Check out My Video's http://www.andytechmotorsport.com/Video/Video.htm . The file is much smaller now. Dan

I'm not selling mine ether, but was just curious to what value others would put on their corrado's. I'll be keeping mine for at least another year & a half. When the time comes, I expect it will be up around 5k